Претрага
81 items
-
Methodology of Geotechnical Investigation of Terrain for Road Design and Construction in Bendel State of Nigeria
Henry N. Erebor (1980)Henry N. Erebor. Methodology of Geotechnical Investigation of Terrain for Road Design and Construction in Bendel State of Nigeria, Faculty of Mining and Geology, 1980
-
Hybrid Model for Optimisation of Waste Dump Design and Site Selection in Open Pit Mining
Aleksandar Doderovic, Svetozar-Milan Doderovic, Sasa Stepanovic, Mirjana Bankovic, Dejan Stevanovic (2023)Waste management is an unavoidable technological operation in the process of raw material extraction. The main characteristic of this technological operation is the handling of large quantities of waste material, which can amount to several hundred million cubic metres. At the same time, this operation must comply with all administrative and environmental standards. Therefore, optimising waste rock management (particularly haulage and dumping) has the potential to significantly improve the overall value of the project. This paper presents a hybrid ...Aleksandar Doderovic, Svetozar-Milan Doderovic, Sasa Stepanovic, Mirjana Bankovic, Dejan Stevanovic. "Hybrid Model for Optimisation of Waste Dump Design and Site Selection in Open Pit Mining" in Minerals, MDPI AG (2023). https://doi.org/10.3390/min13111401
-
Design and drilling of wells in formations with high pressure
Vojin Solomun (2024)Objectives of this Thesis are to: - Develop an awareness of the challenges presented from elevated temperatures and pressures in well construction. - Learn the key differences between ―normal‖ condition wells and HPHT wells. - Understand some of the indicators of thermal- and pressure-related problems. - Understand the responses which may be made to mitigate high pressure and high temperature ,,HPHT‘‘ challenges while drilling wells. HPHT wells are an unavoidable consequence of the ever expanding search for oil and gas resources around the world. As wells are ...Vojin Solomun. Design and drilling of wells in formations with high pressure, 2024
-
Sequential Design of Controller for Grinding Circuit
Ivezić Dejan, Petrović Trajko, Zlatanović Dragan. "Sequential Design of Controller for Grinding Circuit" in Mining and Metallurgy Engineering Bor no. 1, Bor:Institut za rudarstvo i metalurgiju Bor (2016): 55-66. https://doi.org/10.5937/MMEB16010551
-
Corrigendum to „Design and optimisation of laser scanning for tunnels geometry inspection“
Pejić Marko, Božić Branko, Abolmasov Biljana, Gospavić Zagorka. "Corrigendum to „Design and optimisation of laser scanning for tunnels geometry inspection“" in Tunnelling and Underground Space Technology 38, :ElsevierSci Publiching (2013): 287-287. https://doi.org/10.1016/j.tust.2013.07.001
-
Design and optimisation of laser scanning for tunnels geometry inspection
Pejić Marko, Božić Branko, Abolmasov Biljana, Gospavić Zagorka. "Design and optimisation of laser scanning for tunnels geometry inspection" in Tunnelling and Underground Space Technology 37, :ElsevierSci Publiching (2013): 199-206. https://doi.org/10.1016/j.tust.2013.04.004.
-
Multi-criteria decision analysis for the purposes of groundwater control system design.
Bajić Dragoljub, Polomčić Dušan, Ratković Jelena. "Multi-criteria decision analysis for the purposes of groundwater control system design." in Water Resources Management 15 no. 31, :Springer (2017): 4759-4784. https://doi.org/10.1007/s11269-017-1777-4
-
Ventilation Planning and Design of the Omerler B Mine
Lilić Nikola, Čokorilo Vojin, Cvjetić Aleksandar, Milisavljević Vladimir. "Ventilation Planning and Design of the Omerler B Mine" in Podzemni radovi no. 21, Beograd:Rudarsko-geološki fakultet (2012): 33-42
-
Practical application of RM bridge software on prestressed viaduct design
Veljković Ana, Basarić Irena, Moldovan Željka, Bakić Predrag, Stojičić Bojan, Rakić Dragoslav (2014)Veljković Ana, Basarić Irena, Moldovan Željka, Bakić Predrag, Stojičić Bojan, Rakić Dragoslav. "Practical application of RM bridge software on prestressed viaduct design" in Zbornik radova / Peti Internacionalni naučno-stručni skup Građevinarstvo nauka i praksa, Podgorica:Univerzitet Crne Gore Građevinski fakultet (2014): 565-572
-
Geomehanical Aspects Of The Openpit Mutalj External Landfill Design
Čebašek Vladimir, Gojković Nebojša, Dimitrijević Bojan, Rupar Veljko. "Geomehanical Aspects Of The Openpit Mutalj External Landfill Design" in Proceedings of the 13th International Symposium Continuous surface mining ISCSM 2016, Beograd:Yugoslav Opencast Mining Committee (2016): 33-44
-
High cuts on the critical path of the construction of Corridor 10 through Grdelica Gorge: design and construction
Berisavljević Zoran, Šušić Nenad, Ćorić Slobodan, Rakić Dragoslav. "High cuts on the critical path of the construction of Corridor 10 through Grdelica Gorge: design and construction" in Zbornik sedmega posvetovanja slovenskih geotehnikov, Ljubljana:Slovensko geotehniško društvo (2016): 65-69
-
Engineering geological and geotechnical investigations for design of higway E-80 Nis – Merdare
Basarić Irena, Bogdanović Snežana, Rakić Dragoslav,Janković Jovana, Stevanović Miloš. "Engineering geological and geotechnical investigations for design of higway E-80 Nis – Merdare" in 17th International Multidisciplinary Scientific Geoconference SGEM 2017/Conference Proceedings 12 no. 17, Albena: (2017): 279-287. https://doi.org/10.5593/sgem2107/
-
Factorial experimental design for selective flotation of chalcopyrite from copper sulphide ore with moderate content
Kostović Milena, Lazić Predrag, Vučinić Dušica, Deušić Slaven, Tomanec Rudolf. "Factorial experimental design for selective flotation of chalcopyrite from copper sulphide ore with moderate content" in Journal of Mining Science no. 1 or 2, :Elsevier (2015)
-
Ventilation Planning and Design of the Derin Sahalar Mine
Lilić Nikola, Čokorilo Vojin, Cvjetić Aleksandar, Milisavljević Vladimir. "Ventilation Planning and Design of the Derin Sahalar Mine" in Tehnika no. 3, Beograd:Savez Inžinjera i Tehničara Srbije (2013): 425-431
-
GIS supported bauxite deposit geological data as a tool for mining operations design
Milutinović Aleksandar, Ganić Aleksandar, Ganić Meri, Miljanović Igor. "GIS supported bauxite deposit geological data as a tool for mining operations design" in The Geology in Digital Age : proceedings of the 17th Meeting of the Association of European Geological Societies, MAEGS 17, Belgrade, [14-18. 09.] 2011 1, Beograd:The Serbian Geological Society (2011): 27-32
-
Sensitivity analysis of rock mass parameters estimate influence on decline support design using NATM
Slavko Torbica, Veljko Lapčević, Wang Gang, Nemanja Đokić, Miodrag Duranović. "Sensitivity analysis of rock mass parameters estimate influence on decline support design using NATM" in Podzemni radovi (2019). https://doi.org/10.5937/PodRad1934027T
-
INVENTS: A Hybrid Mine Ventilation Planning and Design System
Ventilation system analysis is a complex process based on the calculation and analysis of numerous parameters. These problems can be successfully solved by the SimVent numerical package, but a full understanding and use of the obtained results require the involvement of an experienced specialist in the ventilation field. The solution was found in the creation of a hybrid system INVENTS, whose knowledge base represents a formalization of the expert knowledge in the mine ventilation field. In this paper we ...Lilić Nikola, Stanković Ranka, Obradović Ivan. "INVENTS: A Hybrid Mine Ventilation Planning and Design System" in Proceedings of International Scientific Conference of FME Session 4: Automation Control and Applied Informatics , Hong Kong : iConcept Press (2013)
-
Waste Dump Design Optimization, Case Study Open Pit Drmno
Stevanović Dejan, Banković Mirjana, Rupar Veljko, Milisavljević Vladimir, Cvjetić Aleksandar, Kržanović Daniel (2017)Stevanović Dejan, Banković Mirjana, Rupar Veljko, Milisavljević Vladimir, Cvjetić Aleksandar, Kržanović Daniel. "Waste Dump Design Optimization, Case Study Open Pit Drmno" in Mining and Environmental Protection, 6th International Symposium, MEP 17, Vrdnik, 21-24 June 2017, Beograd:University of Belgrade, Faculty of Mining and Geology (2017): 282-286
-
Design of a sucker rod pumping system
Ana Ponoćko (2024)For a long time in the history of oil production, sucker rod pumps have been the first and in many cases the only choice when it comes to mechanical extraction methods. Proper selection of each individual element of the system enables optimization, which entails benefits in the form of increased efficiency and reduced costs. The first part of the paper presents the underground and surface equipment of the rod pump and describes the operation of the entire system. The ...Ana Ponoćko. Design of a sucker rod pumping system, 2024
-
Model of oil and gas pipeline rinsing using the fluid flow
Batalović Veselin, Danilović Dušan, Živković Marija. "Model of oil and gas pipeline rinsing using the fluid flow" in Journal of Applied Engineering Science 9 no. 1, Beograd:Institute for Research and Design in Commerce and Industry (2011): 237-242