Претрага
24 items
-
Curcumin nanonization using an alternative small-scale production unit: selection of proper stabilizer applying basic physicochemical consideration and biological activity assessment of nanocrystals
Ines Nikolić, Jelena Antić-Stanković, Dragana Božić, Danijela Ranđelović, Bojan Marković, Dominique Jasmin Lunter, Aleksandar Kremenović, Miroslav Savić, Snežana Savić (2020)As the number of poorly soluble drugs is increasing, nanocrystals have become very interesting due to wide range of application possibilities. Curcumin was used as a model active ingredient in this work. Even though it has many proven positive effects, due to its physicochemical issues, its possibilities have not been fully exploited. The goal of this work was to select optimal conditions for a top-down method for curcumin nanosuspension production, and to perform their comprehensive characterization applying complementary methodologies: ...Ines Nikolić, Jelena Antić-Stanković, Dragana Božić, Danijela Ranđelović, Bojan Marković, Dominique Jasmin Lunter, Aleksandar Kremenović, Miroslav Savić, Snežana Savić. "Curcumin nanonization using an alternative small-scale production unit: selection of proper stabilizer applying basic physicochemical consideration and biological activity assessment of nanocrystals" in Review on advanced materials science, Walter de Gruyter GmbH (2020). https://doi.org/10.1515/rams-2020-0043
-
Microstructure refinement and physical properties of Ag-SnO2 based contact materials prepared by high-energy ball milling
Ćosović Vladan, Pavlović Mila, Ćosović Aleksandar, Vulić Predrag, Premović Milena, Živković Dragana, Talijan Nadežda (2013)Ćosović Vladan, Pavlović Mila, Ćosović Aleksandar, Vulić Predrag, Premović Milena, Živković Dragana, Talijan Nadežda. "Microstructure refinement and physical properties of Ag-SnO2 based contact materials prepared by high-energy ball milling" in Science of Sintering 45, Belgrade:Yugoslav Committee for ETAN (2013): 173-180. https://doi.org/10.2298/SOS1302173C
-
Overcoming the Low Oral Bioavailability of Deuterated Pyrazoloquinolinone Ligand DK-I-60-3 by Nanonization: A Knowledge-Based Approach
Jelena R. Mitrović , Branka Divović-Matović, Daniel E. Knutson, Jelena B. Ðoković, Aleksandar Kremenović, Vladimir D. Dobričić, Danijela V. Randjelović, Ivana Pantelić, James M. Cook, Miroslav M. Savić, Snežana D. Savić (2021)Poor water solubility of new chemical entities is considered as one of the main obstacles in drug development, as it usually leads to low bioavailability after administration. To overcome these problems, the selection of the appropriate formulation technology needs to be based on the physicochemical properties of the drug and introduced in the early stages of drug research. One example of the new potential drug substance with poor solubility is DK-I-60-3, deuterated pyrazoloquinolinone, designed for the treatment of various neuropsychiatric ...... techniques, wet media milling is considered optimal early in pharmaceutical development. One of the most important process parameters that affect the kinetics of particle size decrease is milling duration [16]. According to particle size measurements right after preparation, milling time had a significant ...
... nm or more, regardless of milling media volume. PDI decreased after one hour of milling as well, suggesting that more uniform dispersion was obtained, although, in some formulations, the change was not pronounced. As the time increases, the chance for collision between milling media and DK-I-60-3 particles ...
... ZY-S, Sigmund Lindner GmbH, Warmensteinach, Germany) and shaken for 0.5 h or 1 h using a beads-milling cell disruptor equipment (Disruptor Genie, Scientific Industries, Bohemia, NY, USA). After the milling, nanocrystal dispersion was separated from beads and stored in glass bottles for two months. The ...Jelena R. Mitrović , Branka Divović-Matović, Daniel E. Knutson, Jelena B. Ðoković, Aleksandar Kremenović, Vladimir D. Dobričić, Danijela V. Randjelović, Ivana Pantelić, James M. Cook, Miroslav M. Savić, Snežana D. Savić. "Overcoming the Low Oral Bioavailability of Deuterated Pyrazoloquinolinone Ligand DK-I-60-3 by Nanonization: A Knowledge-Based Approach" in Pharmaceutics, MDPI, Basel, Switzerland (2021). https://doi.org/10.3390/pharmaceutics13081188
-
Characterization of bituminite in Kimmeridge Clay by confocal laser scanning and atomic force microscopy
Paul C. Hackley, Jolanta Kus, João Graciano Mendonça Filho, Andrew D. Czaja, Angeles G. Borrego, Dragana Životić, Brett J. Valentine, Javin J. Hatcheries (2022)This work investigates bituminite (amorphous sedimentary organic matter) in Upper Jurassic Kimmeridge Clay source rock via confocal laser scanning microscopy (CLSM) and atomic force microscopy (AFM). These petrographic tools were used to provide better understanding of the nature of bituminite, which has been historically difficult to identify and differentiate from similar organic matter types in source rocks. As part of an International Committee for Coal and Organic Petrology (ICCP) working group, an immature (0.42% vitrinite reflectance), organic-rich (44.1 wt% ...Битуминит, Kонфокална ласерска скенирајућа микроскопија, Mикроскопија атомских сила, Органска петрологија, Термичка зрелостPaul C. Hackley, Jolanta Kus, João Graciano Mendonça Filho, Andrew D. Czaja, Angeles G. Borrego, Dragana Životić, Brett J. Valentine, Javin J. Hatcheries. "Characterization of bituminite in Kimmeridge Clay by confocal laser scanning and atomic force microscopy" in International Journal of Coal Geology, Elsevier BV (2022). https://doi.org/10.1016/j.coal.2022.103927
-
Mechanosynthesis and structural characterization of nanocrystalline Ce1–Y O2– (x=0.1–0.35) solid solutions
Martin Fabián, Bratislav Antić, Vladimír Girman, Milica Vučinić-Vasić, Aleksandar Kremenović, Shigeru Suzuki, Horst Hahn, Vladimír Šepelák (2015)A series of nanostructuredfluorite-type Ce1–xYxO2–δ (0rxr0.35) solid solutions, prepared via highenergy milling of the CeO2/Y2O3mixtures, are investigated by XRD, HR-TEM, EDS and Raman spectroscopy. For thefirst time, complementary information on both the long-range and short-range structural features of mechanosynthesized Ce1–xYxO2–δ, obtained by Rietveld analysis of XRD data and Raman spectroscopy, is provided. The lattice parameters of the as-prepared solid solutions decrease with increasing yttrium content. Rietveld refinements of the XRD data reveal increase in microstrains in the host ceria ...Martin Fabián, Bratislav Antić, Vladimír Girman, Milica Vučinić-Vasić, Aleksandar Kremenović, Shigeru Suzuki, Horst Hahn, Vladimír Šepelák. "Mechanosynthesis and structural characterization of nanocrystalline Ce1–Y O2– (x=0.1–0.35) solid solutions" in Journal of Solid State Chemistry, Elsevier BV (2015). https://doi.org/10.1016/j.jssc.2015.06.027
-
Microstructural and magnetic properties of electrospun hematite/cuprospinel composites
Phase composition, microstructural and magnetic properties of electrospun hematite/cuprospinel composites were investigated. Samples were synthesized starting with 0 to 10 mol% of copper relative to iron. The round shape of reference electrospun fbres was preserved upon their heating up to 600 °C in air, whereas at 700 °C hollow substructure was additionally formed. In these reference samples the presence of hematite phase was detected by XRPD. A small amount (traces) of Fe3O4 /γ-Fe2O3 was also found, due to the ...Electrical and Electronic Engineering, Condensed Matter Physics, Atomic and Molecular Physics and Optics, Electronic, Optical and Magnetic MaterialsMira Ristić, Aleksandar Kremenović, Michael Reissner, Željka Petrović, Svetozar Musić. "Microstructural and magnetic properties of electrospun hematite/cuprospinel composites" in Journal of Materials Science: Materials in Electronics, Springer Science and Business Media LLC (2020). https://doi.org/10.1007/s10854-020-03526-0
-
Adaptive neuro-fuzzy prediction of operation of the bucket wheel drive based on wear of cutting elements
The capacity of the rotor excavator depends largely on the operation of the subsystem for digging. There is a great contribution to the correct and sharp teeth when the capacity is the highest. In the function of time, the teeth become clogged due to abrasive wear, or changes in their geometric shape. To analyze the bucket wheel drive in depend on wear of the cutting elements in this study adaptive neuro fuzzy inference system (ANFIS) approach was implemented. ANFIS ...Filip Miletić, Predrag D. Jovančić, Milos Milovančević, Dragan Ignjatović. "Adaptive neuro-fuzzy prediction of operation of the bucket wheel drive based on wear of cutting elements" in Advances in Engineering Software, Elsevier BV (2020). https://doi.org/10.1016/j.advengsoft.2020.102824
-
Synthesis and characterization of high-pressure and high-temperature sphene (CaTiSiO5)
Jelena Pantić, Vladimir Urbanovich, Vesna Poharc-Logar, Bojan Jokić, Marija Stojmenović, Aleksandar Kremenović, Branko Matović (2014)Sphene (CaTiSiO5), a calcium titanosilicate ceramic has been prepared from a powder mixture of CaCO3, TiO2 and SiO2 using vibro-milling for homogenization and activation of precursors. During the highpressure and high-temperature synthesis (HPS) process at 4 GPa and 1,200 °C, sphene undergoes into phase transition, from room-temperature phase P21/a to high-temperature phase A2/a. Evidence of that structural phase transition is given in this paper using infrared, Raman spectroscopy and X-ray powder diffraction. Rietveld refinement was employed to get the ...Jelena Pantić, Vladimir Urbanovich, Vesna Poharc-Logar, Bojan Jokić, Marija Stojmenović, Aleksandar Kremenović, Branko Matović. "Synthesis and characterization of high-pressure and high-temperature sphene (CaTiSiO5)" in Physics and Chemistry of Minerals, Springer Science and Business Media LLC (2014). https://doi.org/10.1007/s00269-014-0693-x
-
Mineralogical analysis of a clay body from Zlakusa, Serbia, used in the manufacture of traditional pottery
... and low Al,Os, Fe)»Os and Na»O contents (Table 1). The slightly larger amounts of Al,O; and Na»O are due to contamination by clay minerals during milling. The large CaO content is related to the abundant carbonates, which are also 150 -, sample CIMx 125 -| in te ns it y (c ou nt s) in te ...Maja Milošević, Biljana Đorđević, Mihovil Logar. "Mineralogical analysis of a clay body from Zlakusa, Serbia, used in the manufacture of traditional pottery" in Clay Minerals (2020). https://doi.org/10.1180/clm.2020.20
-
Application of VIКOR method in the selection of an optimal splution of excavation “Borska Reka” ore deposit
Sanja Bajić, Dragoljub Bajić, Branko Glušćević, Radmila Gaćina. "Application of VIКOR method in the selection of an optimal splution of excavation “Borska Reka” ore deposit" in 9th International Conference Mining and Environmental protection MEP, 24 – 27 May 2023, Sokobanja, Serbia , Belgrade : University of Belgrade-Faculty of mining and geology (2023)
-
Characterization and Environmental Evaluation of Recycled Aggregates from Construction and Demolition Waste in Belgrade City Area (Serbia)
Filip Abramović, Miroslav Popović, Vladimir Simić, Vesna Matović, Radmila Šerović. "Characterization and Environmental Evaluation of Recycled Aggregates from Construction and Demolition Waste in Belgrade City Area (Serbia)" in Materials, MDPI AG (2024). https://doi.org/10.3390/ma17040820
-
BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1) Composites Synthesized by Thermal Decomposition: Magnetic, Dielectric and Ferroelectric Properties
Marija Šuljagić, Ivan Petronijević, Miljana M. Mirković, Aleksandar Kremenović, Adis Džunuzović, Vladimir B. Pavlović, Aleksandra Kalezić-Glišović, Ljubica Andjelković (2023)To investigate the influence of spinel structure and sintering temperature on the functional properties of BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1), NiFe2O4, ZnFe2O4, and Ni0.5Zn0.5Fe2O4 were in situ prepared by thermal decomposition onto BaTiO3 surface from acetylacetonate precursors. As-prepared powders were additionally sintered at 1150 °C and 1300 °C. X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS) were used for the detailed examination of phase composition and morphology. The magnetic, dielectric, and ...ferroelectric, dielectric properties, magnetic properties, titanate/ferrite composites, phase composition... S4anchez-De Jesus, F. Magnetodielectric coupling, in barium titanate-cobalt ferrite composites obtained via thermally-assisted high-energy ball milling. Ceram. Int. 2022, 48, 9527—9533. CrossRef] Dzunuzovic, A.S.; Petrovic, M.M.V.; Stojadinovic, B.S.; Ilic, N.L; Bobic, J.D.; Foschini, C.R.; Zaghete ...Marija Šuljagić, Ivan Petronijević, Miljana M. Mirković, Aleksandar Kremenović, Adis Džunuzović, Vladimir B. Pavlović, Aleksandra Kalezić-Glišović, Ljubica Andjelković. "BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1) Composites Synthesized by Thermal Decomposition: Magnetic, Dielectric and Ferroelectric Properties" in Inorganics, MDPI AG (2023). https://doi.org/10.3390/inorganics11020051
-
Примена CNC машина при обради мермера
Ненад Остојић (2024)Мермер је стена настала метаморфизмом седиментних карбонатних стена, најчешће кречњака или доломита. Мермер се углавном састоји од калцита,кречњака, серпентина и доломита. Његове главне компоненте су углавном калцијум карбонат, који чини више од 50 посто, и други магнезијум карбонат, калцијум оксид, манган оксид и силицијум диоксид, итд. Фазе обраде мермера су: примарно резање мермерних блокова у плоче, површинска обрада мермерних плоча, секундарно резање мермерних плоча, терцијарна обрада (ако је потребно). CNC машина је електро-механички уређај који управља алатима, користећи програмирање путем ...... rs/vesti/clanak/cnc-masine, 10.06.2024. [5] Basics of CNC programming of 3 axis milling: machines using the SolidWork software · package, https://ftn.pr.ac.rs/wp-content/uploads/2022/10/Basics-of-CNC- programming-of-3-axis-milling-machines-using-the-SolidWorks-software-package.pdf, 12.06.2024. [6] ...Ненад Остојић. Примена CNC машина при обради мермера, 2024
-
Freeze-dried nanocrystal dispersion of novel deuterated pyrazoloquinolinone ligand (DK-I-56-1): Process parameters and lyoprotectant selection through the stability study
Jelena R. Mitrović, Maja Bjelošević Žiberna, Aleksandar Vukadinović, Daniel E. Knutson, Dishary Sharmin, Aleksandar Kremenović, Pegi Ahlin Grabnar, Odon Planinšek, Dominique Lunter, James M. Cook, Miroslav M. Savić, Snežana D. Savić (2023)Recently, nanocrystal dispersions have been considered as a promising formulation strategy to improve the bioavailability of the deuterated pyrazoloquinolinone ligand DK-I-56-1 (7‑methoxy-2-(4‑methoxy-d3-phenyl)-2,5-dihydro-3H-pyrazolo[4,3-c]quinolin-3-one). In the current study, the freeze-drying process (formulation and process parameters) was investigated to improve the storage stability of the previously developed formulation. Different combinations of lyoprotectant (sucrose or trehalose) and bulking agent (mannitol) were varied while formulations were freeze-dried under two conditions (primary drying at -10 or -45 °C). The obtained lyophilizates were characterized in terms ...... (Patel et al., 2020). In our recent article, parenteral nanocrystal dispersions of DK-I-56-1 were developed and prepared by small-scale wet ball milling technique. The selected for- mulations exhibited small and uniform particle size with acceptable short-term stability (three weeks), retained ...Jelena R. Mitrović, Maja Bjelošević Žiberna, Aleksandar Vukadinović, Daniel E. Knutson, Dishary Sharmin, Aleksandar Kremenović, Pegi Ahlin Grabnar, Odon Planinšek, Dominique Lunter, James M. Cook, Miroslav M. Savić, Snežana D. Savić. "Freeze-dried nanocrystal dispersion of novel deuterated pyrazoloquinolinone ligand (DK-I-56-1): Process parameters and lyoprotectant selection through the stability study" in European Journal of Pharmaceutical Sciences, Elsevier BV (2023). https://doi.org/10.1016/j.ejps.2023.106557
-
Upravljanje proizvodnjom nafte – novi alat na bazi fazi logike
... Zrenjanin Optimizacija proizvodnje sa aspekta njene primene na CNC glodalici Production optimization from the aspect of its application on CNC milling machines Rezime: Predmet istraživanja u ovom radu zasnovan je na optimizaciji proizvodnog procesa u aspektu pripreme proizvodnje, primenom savremenih ...
... Abstract: The subject of this research is based on the optimization of the manufacturing process using modern automated CNC milling machines. The problem that has generally appeared on the world market is the fulfillment of goals dictated by the modern era, which are reflected ...
... large - scale production, the importance of the preparation of production for the total time and production costs. Keywords: Optimization, CNC, milling machine, production preparation, costs. UVOD U doba modernih informacionih tehnologija, stepen automatizacije je naglo porastao, kako bi proizvodnja ...Мирослав Црногорац, Душан Даниловић, Лола Томић. "Upravljanje proizvodnjom nafte – novi alat na bazi fazi logike" in IX Naučno stručni skup Preduzetništvo, inženjerstvo i menadžment Zrenjanin, 24.10.2020. god., Visoka tehnička škola strukovnih studija u Zrenjaninu (2020)
-
Efikasnost različitih tipova glina Srbije za adsorpciju metilen plavog
Maja D. Milošević (2016-12-09)Adsorpciona efikasnost različitih uzoraka glina sa lokaliteta Srbije određenaje njihovim tretiranjem različitim koncentracijama rastvora metilen plavog (MP).Detaljna mineraloška karakterizacija ispitivanih glina i rezultati njihove interakcijesa rastvorima MP dobijeni su primenom optičkih, rendgenskih, hemijskih, DTA ispektroskopskih metoda.Na osnovu formiranja MP agregata u izmenljivim pozicijama i površiničestica gline, razlikuju se dva tipa glinovitih minerala: visoko naelektrisani(smektiti) i nisko naelektrisani (kaoliniti). Dimeri se stvaraju na naelektrisanimpovršinama, a granica njihovog razvoja omogućuje determinaciju mineralne vrste.Molekuli MP stoje pod uglom od 21.5o kada se ...minerali glina, metilen plavo, kristali metilen plavog, difuznarefleksija, adsorpcija, flokulacija, naelektrisanje slojeva... Genovese C. and Perathoner S. 2007. Copper - and iron- pillared clay catalysts for the WHPCO of model and real wastewater streams from olive oil milling production. Applied Catalysis B: Environmental 70: 437 - 446 116 Celik M.S., Akin Y. and Hancer M. 1996. Decompression of electrical double ...Maja D. Milošević. "Efikasnost različitih tipova glina Srbije za adsorpciju metilen plavog" in Универзитет у Београду, Универзитет у Београду, Рударско-геолошки факултет (2016-12-09)
-
Геохемијске карактеристике флотацијског јаловишта рудника Грот (југоисточна Србија)
Božidar Đokić (2012-07-16)У дисертацији су анализиране геохемијске карактеристике флотацијскогјаловишта које се налази на највишој надморској висини у Србији. Јаловиште јенастало преграђивањем узводно од Селишког потока. Географске, геолошке игеоморфолошке карактеристике области у којима је смештено највећим делом суутицали на његову морфологију и морфометрију. Јаловиште чини велики, јужни ијугоисточни плато и велика брана. Делови јаловишта су засебно испитивани, азатим и њихова међусобна интеракција и утицаји на окружење.Прикупљени узорци су испитивани рендгенском дифракциономанализом, скенирајућом електронском микроскопијом, рендгенскомфлуоресцентном спектрометријом, гранулометријском и хемијском анализом.Рендгенском дифракционом анализом ...флотација, јаловиште, скенирајућа електронско-микроскопскаанализа, рендгенска флуоресцентна спектрометрија, Pb-Zn руда,тешки метали, контаминација... com/kobalt (15.03 2012). Волфрам доступно на http://www.pse.pbf.hr/elementi/index (15.03 2012). Environmental Activites in Uranium Mining and Milling: joint report (1999) доступно на http://www.International Atomic Energy Agency (15.03 2012). Божидар В. Ђокић Геохемијске карактеристике фл ...Božidar Đokić. "Геохемијске карактеристике флотацијског јаловишта рудника Грот (југоисточна Србија)" in Универзитет у Београду, Универзитет у Београду, Рударско-геолошки факултет (2012-07-16)
-
Геохемијске карактеристике флотацијског јаловишта рудника Грот (југоисточна Србија)
Božidar Đokić (2012-07-16)У дисертацији су анализиране геохемијске карактеристике флотацијскогјаловишта које се налази на највишој надморској висини у Србији. Јаловиште јенастало преграђивањем узводно од Селишког потока. Географске, геолошке игеоморфолошке карактеристике области у којима је смештено највећим делом суутицали на његову морфологију и морфометрију. Јаловиште чини велики, јужни ијугоисточни плато и велика брана. Делови јаловишта су засебно испитивани, азатим и њихова међусобна интеракција и утицаји на окружење.Прикупљени узорци су испитивани рендгенском дифракциономанализом, скенирајућом електронском микроскопијом, рендгенскомфлуоресцентном спектрометријом, гранулометријском и хемијском анализом.Рендгенском дифракционом анализом ...флотација, јаловиште, скенирајућа електронско-микроскопскаанализа, рендгенска флуоресцентна спектрометрија, Pb-Zn руда,тешки метали, контаминација... com/kobalt (15.03 2012). Волфрам доступно на http://www.pse.pbf.hr/elementi/index (15.03 2012). Environmental Activites in Uranium Mining and Milling: joint report (1999) доступно на http://www.International Atomic Energy Agency (15.03 2012). Божидар В. Ђокић Геохемијске карактеристике фл ...Božidar Đokić. "Геохемијске карактеристике флотацијског јаловишта рудника Грот (југоисточна Србија)" in Универзитет у Београду, Универзитет у Београду, Рударско-геолошки факултет (2012-07-16)
-
Arsenopirit iz rudnih ležišta Šumadijsko-kopaoničke oblasti: paregeneza, sastav i produkti oksidacije
Ivana N. Jelić (2023)Arsenopirit, FeAsS je čest pratilac polimetaličnih orudnjenja Šumadijsko-kopaoničke oblasti. Jedan je od sulfida koji u najvećoj meri koncentriše zlato. Nepoželjan je u rudama jer njegovom oksidacijom na jalovištima može doći do oslobađanja arsena koji spada u elemente toksične za životnu sredinu. U okviru ovog doktorata sistematski su ispitivani arsenopiriti iz različitih stadijuma i tipova orudnjenja rudnih ležišta i mineralizacija Šumadijsko-kopaoničke oblasti (Rudnik, Sastavci, Trepča, Gokčanica – Drenjak i Rujak, Golijska reka i Jurija). Uzorci arsenopirita ispitivani su polarizacionom mikroskopijom ...... debljina preparata u centru od 10 mikrometara (rubovi se ne diraju). . Nakon toga, sledi stanjivanje preparata do perforacije jonima argona (Jom milling) uz pomoć uređaja Double Beam Modulator, uslovi rada: 2 rpm rotacije, 4 kV i upadni ugao 89 u trajanju 2-3 sata. Slika 3.16. Transmisioni elektronski ...Ivana N. Jelić. Arsenopirit iz rudnih ležišta Šumadijsko-kopaoničke oblasti: paregeneza, sastav i produkti oksidacije, Beograd : [I. Jelić], 2023
-
Model inteligentnog sistema adaptivnog upravljanja procesom prerade rude
Ivana M. Jovanović (2016-01-13)U oblasti procesa prerade rude, flotacijska koncentracija predstavlja jednu od najznačajnijih i najčešće primenjivanih metoda separacije korisnih od nekorisnih minerala. Samim tim, veoma je važno osigurati uspešan rad flotacijskog postrojenja kroz dostizanje zadovoljavajućih tehno-ekonomskih pokazatelja. Cilj upravljanja procesom flotacijske koncentracije je upravo optimizacija kvaliteta i iskorišćenja korisne komponente u koncentratu uz maksimizaciju profita. Shodno tome, istraživanja na polju modelovanja i upravljanja ovim procesom zauzimaju značajno mesto u praksi kontolnog inženjenringa.Teorijska istraživanja u okviru doktorske disertacije obuhvatila su analizu položaja ...flotacijska koncentracija, modelovanje, upravljanje, inteligentni sistem, soft kompjuting, fazi logika, veštačke neuronske mreže... August, pp. 159–166 116. Iorio, A.S., Smith, V.C., Brereton-Stiles, P.J., Singh, A., 2003. Mintek's advanced optimisation control strategies in milling, flotation and smelting. Proceedings of the First African Control Conference, 3-5 December 2003, University of Cape Town, South Africa, pp. 492–497 ...Ivana M. Jovanović. "Model inteligentnog sistema adaptivnog upravljanja procesom prerade rude" in Универзитет у Београду, Универзитет у Београду, Рударско-геолошки факултет (2016-01-13)