Претрага

Упит dcterms_subject_txt:Nanocrystalline material

342 items

  • Mechanosynthesis and structural characterization of nanocrystalline Ce1–Y O2– (x=0.1–0.35) solid solutions

    Martin Fabián, Bratislav Antić, Vladimír Girman, Milica Vučinić-Vasić, Aleksandar Kremenović, Shigeru Suzuki, Horst Hahn, Vladimír Šepelák (2015)
    A series of nanostructuredfluorite-type Ce1–xYxO2–δ (0rxr0.35) solid solutions, prepared via highenergy milling of the CeO2/Y2O3mixtures, are investigated by XRD, HR-TEM, EDS and Raman spectroscopy. For thefirst time, complementary information on both the long-range and short-range structural features of mechanosynthesized Ce1–xYxO2–δ, obtained by Rietveld analysis of XRD data and Raman spectroscopy, is provided. The lattice parameters of the as-prepared solid solutions decrease with increasing yttrium content. Rietveld refinements of the XRD data reveal increase in microstrains in the host ceria ...
    Ceria, Yttrium, Solid solution, Mechanosynthesis, Oxygen vacancy, Nanocrystalline material

  • Determination of Mechanical Properties of Altered Dacite by Laboratory Methods

    Veljko Rupar, Vladimir Čebašek, Vladimir Milisavljević, Dejan Stevanović, Nikola Živanović (2021)
    This paper presents a methodology for determining the uniaxial and triaxial compressive strength of heterogeneous material composed of dacite (D) and altered dacite (AD). A zone of gradual transition from altered dacite to dacite was observed in the rock mass. The mechanical properties of the rock material in that zone were determined by laboratory tests of composite samples that consisted of rock material discs. However, the functional dependence on the strength parameter alteration of the rock material (UCS, intact ...
    Geology, Geotechnical Engineering, Engineering Geology
    ... composite samples that consisted of rock material discs. However, the functional dependence on the strength parameter alteration of the rock material (UCS, intact UCS of the rock material, and mi) with an increase in the participation of “weaker” rock material was determined based on the test results ...
    ... composite samples that consisted of rock material discs. However, the functional dependence on the strength parameter alteration of the rock material (UCS, intact UCS of the rock material, and m;) with an increase in the participation of “weaker” rock material was determined based on the test results ...
    ... shown procedure, monolithic rock material (100% D and 100% AD) specimens and discs of rock material were prepared. Discs of rock material were used to form groups of composite specimens that contained 10%, 30%, 50%, and 70% volumetric participation of weaker material (altered dacite) (Figure 4). It is ...

  • Fragmentation Size Prediction of Blasted Material Using a Specialized Software for Drilling and Blasting

    Stefan Milanović, Nikola Simić, Lazar Kričak, Milanka Negovanović, Nikola Đokić, Miljan Gomilanović (2024)
    Design and optimizing the drilling and blasting parameters, should fill the requirements for the capacity, fragmentation size, and technical characteristics of loading and transport equipment, and enable a safe work at the open pit. Besides mentioned, it also achieves the minimal impact on the environment of the open pit and decreases the negative effects on the environment, especially in the blast vibration and flyrock. To obtain the best possible blasting effects and consider all the factors, a specialized software is ...
    optimization, O-Pitblast, drilling, blasting, fragmentation size

  • Local Clay as Raw Material in the Oil Industry

    M.B. Oyeneyin (1978)
    Clay, raw material, oil

  • Correlation Between Dynamic CBR and Compaction and Bearing Capacity of Pavement Foundation Layers

    Milan Bogdanović, Snežana Bogdanović, Dragoslav Rakić, Irena Basarić Ikodinović (2024)
    This paper presents a dynamic California Bearing Ratio (CBRd) device that can be used on a prepared pavement foundation layer to obtain a certain parameter of the tested material in the laboratory and in situ in a direct and fast way. For the selected natural material (gravel), it is shown that the laboratory CBRd can be used to estimate the compaction and bearing capacity, because it correlates well with the parameters of the standard and modifed Proctor compaction tests. ...
    korelacija parametara, donji slojevi saobraćajnica, laboratorijska i terenska ispitivanja, dinamički kalifornijski indeks nosivosti CBRd
    ... that can be usedon a prepared pavement foundation layer to obtain a certain parameter of the tested material in the laboratory and in situ in a direct and fast way. For the selected natural material (gravel), it is shown that the laboratory CBR, can be used to estimate the compaction and bearing ...
    ... to solve practical tasks. Materials and Methods All tests were performed on natural gravel material sampled at a temporary landfill at 'Batajnica Inter- modal Terminal in Belgrade. The same material was used for laboratory and in-situ testing. The grain size distribution was determined on the ...
    ... 7. The identification-classification analysis of the natural material samples in accordance with SRPS EN ISO 14688-2:2018 did not indicate significant differences in the grain size distribution, and it was determined that the material is natural mineral soil, sandy gravel (Sa-Gr), and non-plastic ...

  • Numerical Models of Debris Flows with Entrainment Analysis-Case Studies from the Republic of Serbia

    Jelka Krušić , Biljana Abolmasov, Miloš Marjanović (2021)
    The results of material entrainment analysis in RAMMS debris flow software, as well as numerical models of final flow heights for two case studies from the Republic of Serbia are presented. Both of debris flow cases started with initial sliding of huge volume block, prolonging to behave as flowing process. Results of the analysis showed that entrainment material affects final results of transportation model, runout distance, deposition area and volume of debris flow. In both cases entrainment volume is very ...
    tecišta, zadržavanje nanosa, RAMMS, validacija

  • Application of ERT in the study of debris-flow source area: Case study Selanac debris flow

    Dragana Đurić, Jelka Krušić, Biljana Abolmasov (2021)

  • Influence of DEM resolution on numerical modelling of debris flows in RAMMS - Selanac case study

    Jelka Krušić, Biljana Abolmasov, Mileva Samardžić Petrović (2019)
    Debris flows induced by intensive rainfall represent very hazardous phenomena in many parts of the World. Methods for prediction of runout distance of flow like mass movements are different and depending on the input data, rheology, and available or appropriate numerical solution. However, sometimes it is not easy to obtain pre event and post event high-resolution data in the rural or mountainous area. Thus, the topology of terrain is the most important input parameter for the every real case ...
    tecišta, modeliranje, RAMMS, DEM
    ... l station Loznica registered maximum of 230 mm of rain for 72 hours. Huge amount of material started to move as a block during the night of May, 15th 2014, which is visible on the main scarp 30m high. Material further transported as a flow throw two predisposed gullies with occasional flows. G ...
    ... m/s 2 best fitted resistance parameters. Enlarge of frictional parameter gave much more amount of material in deposition zone which is not estimated. Using this parameters, estimated material was reached, but with a less deposition height (Fig. 5). J. Krušić et al.– Influence of DEM ...
    ... deposited material depth≈5m In other case, almost the same volume was reached in deposition zone but with much greater deposition height. The best fitted parameters that were chosen are μ=0.11 and ξ=500 m/s2 (Fig 6). In both cases, there are a lot of outflow materials, since material was transported ...

  • Contribution to the geotechnical classification of municipal waste landfills in Serbia

    Dragoslav Rakić, Irena Basarić, Laslo Čaki, Slobodan Ćorić (2018)
    Management, Monitoring, Policy and Law, Nature and Landscape Conservation, Geochemistry and Petrology, Waste Management and Disposal,Geotechnical Engineering and Engineering Geology,Water Science and Technology,Environmental Chemistry,Environmental Engineering

  • Phase relations and physical indicators of municipal waste from old landfills in Serbia

    Dragoslav R Rakić, Irena G Basarić Ikodinović, Jovana M Janković, Tina D Đurić (2021)
    Due to certain similarities of municipal waste and soil, usually for the determination of basic parameters of physical state, laboratory and field tests which are common in geotechnical investigations are used. It is often to construct an apparatus for special purpose to perform some specific laboratory and field tests. Therefore, different values of indicators of municipal waste physical state can be found in the literature. The basic reasons should be found in different definitions and methods that researchers use ...
    municipal waste, moisture content, unit weight, specific gravity, grain size distribution, porosityGeneral Computer Science
    ... .org/10.3208/jgssp.v09.cpeg016 105 material composition of waste is determined by the mass participation of basic components (Figure 2). As it can be seen, waste contains significant percentage of unclassified and soil material (either from the material used for covering or due to the advanced ...
    ... improvised sieves. Grain size distribution of municipal waste was determined on the selected material from both landfills. Material was firstly mixed and homogenized, so the depth of taken material was not taken into consideration. Regardless of the fact that during the waste sorting, particles ...
    ... content of municipal waste, it is recommended that representative sample of material, before annealing, firstly sieve and separate into two fractions: finer and larger of 20 mm. 107 Thereafter, loss of material is determined, particularly on particles smaller than 20 mm and particularly on ...

  • A Data Driven Approach for Raw Material Terminology

    Olivera Kitanović, Ranka Stanković, Aleksandra Tomašević, Mihailo Škorić, Ivan Babić, Ljiljana Kolonja (2021)
    The research presented in this paper aims at creating a bilingual (sr-en), easily searchable, hypertext, born-digital, corpus-based terminological database of raw material terminology for dictionary production. The approach is based on linking dictionaries related to the raw material domain, both digitally born and printed, into a lexicon structure, aligning terminology from different dictionaries as much as possible. This paper presents the main features of this approach, data used for compilation of the terminological database, the procedure by which it has ...
    sirovine, rudarstvo, terminologija, rečnik, terminološka aplikacija, mobilna aplikacija, digitizacija, leksički podaci, korpusi, otvoreni povezani podaci
    ... dictionaries used in raw material industry, termbases covering raw material terminology, corpora of texts from the raw material domain as well as general-purpose electronic dictionaries of Serbian. This section offers an overview of these resources. 2.1. Paper Dictionaries for Raw Material Domain The Bureau ...
    ... contain basic terminology from various raw material subdomains (areas), needed to make reading professional literature easier, academic writing purposes and to improve communication among professionals in the raw material industry. In addition to core raw material terms, some technical and academic vocabulary ...
    ... to raw material were added to SrpMD, which initially contained more than 3000 simple-word entries and 2000 multi-word entries from the raw material domain. The number of their morphological forms recorded in this resource is significantly larger. The simple-word forms pertaining to raw material termi- ...

  • Examination and characterization of nanostructured Co0.9Ho0.1MoO4

    Милена Росић, Маја Милошевић, Мариа Чебела, Владимир Додевски, Весна Лојпур, Марија Васић, Александра Зарубица (2023)
    ... Application : New Frontiers in Multifunctional Material Science and Processing (11 ; 2023 ; Beograd) Program ; and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application XI New Frontiers in Multifunctional Material Science and Processing, Serbian Academy of Sciences ...
    ... Лојпур, Марија Васић, Александра Зарубица | Serbian Ceramic Society Conference - Аdvanced ceramics and application XI New Frontiers in Multifunctional Material Science and Processing Program and the Book of Abstracts, Serbian Academy of Sciences and Arts, Serbia, Belgrade, 18-20. September 2023. | 2023 | ...
    ... available at: www.dr.rgf.bg.ac.rs Serbian Ceramic Society Conference ADVANCED CERAMICS AND APPLICATION XI New Frontiers in Multifunctional Material Science and Processing Serbian Ceramic Society Institute of Technical Sciences of SASA Institute for Testing of Materials Institute of Chemistry ...

  • Optimization and Analysis of Drilling and Blasting Parameters Using O-Pitblast Software

    Stefan Milanović, Nikola Simić, Lazar Kričak, Milanka Negovanović, Nikola Đokić (2024)
    The development of modern technologies has enabled the application of specialized softwares in the field of mining through various segments and processes, including in works related to drilling and blasting. The application of specialized software for drilling and blasting with the use of modern technologies such as photogrammetry enabled more accurate data from the field for later processing. By processing data and creating a 3D model of the terrain for drilling and blasting works, it can obtain precise data, ...
    optimizacija, 3D model, bušenje, miniranje, O-Pitblast, softver

  • Extreme Rainfall Event and Its Aftermath Analysis—IPL 210 Project Progress Report

    Biljana Abolmasov, Mileva Samardžić Petrović, Ranka Stanković, Miloš Marjanović, Jelka Krušić, Uroš Đurić (2021)
    Landslides, Extreme precipitation, Data analysis, IPL project report

  • Numerical modeling of Selanac debris flow propagation using SPH code

    Jelka Krušić, Biljana Abolmasov, Miloš Marjanović, Manuel Pastor, Saeid M. Tayyebi (2021)
    The Selanac debris flow is a very huge event triggered after extreme rainfall caused by Cyclone Tamara activity in the Republic of Serbia in May 2014. The Selanac case study was already modelling in different programs using Voellmy rheology assumptions like RAMMS software. In this paper research are focusing particularly on the process of debris flowing from initiation zone to main deposition area using Geoflow SPH two-phase model considering frictional rheology law. Main rheological parameters are back-calculated using also ...
    debris flow, modelling, SPH code, DEM
    ... the field investigation and high resolution Digital Terrain Model (DTM). Concerning entrainment of material, which was deep in some parts of debris flow process, simulation results of eroded material was also taken into account. 2 CASE STUDY The Selanac debris flow was activated after the Cyclone ...
    ... n. Plot screen of the final models are shown in Fig.3 The total motion of material from the main deposition zone further to Selanačka river valley is also depicted. Final results were compared with deposited material heights measured with ERT (Electric Resistivity Tomography) profiles. According ...
    ... parameters are back-calculated using also Voellmy turbulent coefficient where best-fitted parameter was 1000 m/s 2 . The amount of entrainment material was included and calculated using Hungr approach. Apart from detail engineering geological mapping of debris flow, Electrical Resistivity Tomography ...

  • Дефинисање механичких својстава алтерисаног стенског материјала лабораторијским методама

    Вељко М. Рупар (2022)
    Основни циљ овог рада је да представи методологију одређивања механичких својстава хетерогеног стенског масива који изграђују дацит (Д) и алтерисани дацит (АД), где је уочена је зона постепеног преласка од алтерисаног дацита до дацита. Механичка својства стенског масива у тој зони утврђена су на основу лабораторијских испитивања једноосне и троосне чврстоће на притисак стенског материјала композитних узорака. Композитни узорци су се састојали од дискова стенског материјала, при чему је висина дискова h дефинисала различити процентуални удео појединог стенског материјала, ...
    дацит, алтерисани дацит, једноосна чврстоћа на притисак, троосна чврстоћа на притисак, композитни узорци, механика стена, стабилност косина

  • Ophiolites and related geology of the Balkan region (Editorial Material).

    Robertson H.F. Alastair, Karamata Stevan, Šarić Kristina (2009)

  • Investigation of nanostructured Ca0.9Er0.1MnO3 obtained by sucrose nitrate procedure

    Tijana B. Vlašković, Bojana Laban, Maja Milošević, Maria Čebela, Vladimir Dodevski, Milena Rosić (2023)
    ... Application : New Frontiers in Multifunctional Material Science and Processing (11 ; 2023 ; Beograd) Program ; and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application XI New Frontiers in Multifunctional Material Science and Processing, Serbian Academy of Sciences ...
    ... available at: www.dr.rgf.bg.ac.rs Serbian Ceramic Society Conference ADVANCED CERAMICS AND APPLICATION XI New Frontiers in Multifunctional Material Science and Processing Serbian Ceramic Society Institute of Technical Sciences of SASA Institute for Testing of Materials Institute of Chemistry ...
    ... Belgrade, 18-–20. September 2023. Serbian Ceramic Society Conference ADVANCED CERAMICS AND APPLICATION XI New Frontiers in Multifunctional Material Science and Processing Serbian Ceramic Society Institute of Technical Sciences of SASA Institute for Testing of Materials Institute of Chemistry ...

  • Tailoring of K0.8Al0.7Fe0.15Si2.25O6 leucite based dental ceramic material

    Kremenović Aleksandar, Fabián Martin, Vulić Predrag, Jovalekić Čedomir, Briančin Jaroslav (2016)

  • Industrial waste utilization in building material industry (Upotreba industrijskog otpada u industriji građevinskih materijala)

    Kostović Milena (2013)