Претрага

Упит dcterms_subject_txt:Influence of synthesis method

2656 items

  • Understanding the effect of synthesis and sintering temperature on the functional properties of barium titanate/cobalt ferrite composites

    Marija Šuljagić, Aleksandar Kremenović, Ivan Petronijević, Adis Džunuzović, Miljana Mirković, Vladimir Pavlović, Ljubica Anđelković (2023)
    To investigate the effect of synthesis procedure and sintering temperature on the functional properties of perovskite/spinel ceramics, BaTiO3/CoFe2O4 composites were prepared by thermal decomposition, coprecipitation, and microemulsion method, and sintered at 1150°C and 1300°C. The phase composition and morphology of as-prepared powders as well as sintered ceramics were thoroughly examined by X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS). The dielectric and ferroelectric measurements were performed in detail. Generally, the ...
    Perovskite/spinel ceramics, Multiferroic, Sintering, Influence of synthesis method

  • Synthesis, characterization and photocatalytic examination of Co0.9Ho0.1MoO4 nanopowders

    Milena Rosić, Maja Milošević, Maria Čebela, Vladimir Dodevski, Vesna Lojpur, Radomir Ljupković, Aleksandra Zarubica (2023)
    ... I), University of Belgrade Institute of Physics, University of Belgrade Center of Excellence for the Synthesis, Processing and Characterization of Materials for use in Extreme Conditions "CEXTREME LAB” - Institute of Nuclear Sciences "Vinča”, University of Belgrade Faculty of Mechanical Engineering ...
    ... University of Belgrade Center of Excellence for the Synthesis, Processing and Characterization of Materials for use in Extreme Conditions “ĆCEXTREME LAB” – Institute of Nuclear Sciences “Vinča”, University of Belgrade Faculty of Mechanical Engineering, University of Belgrade Center of Excellence ...
    ... Conference of The Serbian Society for Ceramic Materials The Serbian Society for Ceramic Materials Institute for Multidisciplinary Research, University of Belgrade Institute of Physics, University of Belgrade Center of Excellence for the Synthesis, Processing and Characterization of Materials ...

  • Influence of Post-Synthesis Treatments on the Properties of Brushite/Monetite Powders

    Željko Radovanović, Lidija Radovanović, Aleksandar Kremenović, Đorđe Janaćković, Rada Petrović (2022)
    Dicalcium phosphate (DP) materials, of which brushite and monetite were the most known, have been intensively studied for several decades because of excellent resorptive and osteoconductive properties that can satisfy the requirements needed for various medical applications, such as bone cements, coatings of metallic implants and bone grafts ...

  • Selection of Artificial Lift Methods: A Brief Review and New Model Based on Fuzzy Logic

    Miroslav Crnogorac, Miloš Tanasijević, Dušan Danilović, Vesna Karović Maričić, Branko Leković (2020)
    Artificial lift methods have applications in oil wells where oil production is no longer possible due to natural reservoir energy, so this necessary energy is added by introducing lift methods. In order to achieve optimum production, the selection of an artificial lift method is very important. This paper uses fuzzy logic as a mathematical and conceptual model for selection of the optimal artificial lift method. The outcome or IF-THEN rules, as the central part of the model, is based ...
    mehaničke metode, proizvodnja nafte, fazi logika, donošenje odluka, optimizacija
    ... quantities of fluid are more widely used. 3.2. Synthesis Part of the Model The synthesis of partial indicators (A, B, C) into one (M) is performed by fuzzy composition, which is a model that provides the structure of indicators-influencing M performance. In other words, if the influence indicators ...
    ... the indicated parameters to the same form in the analytical sense and to find a synthesis model. 3. Development of a Conceptual Model for the Selection of an Artificial Lift Parameters that define the optimal method are considered in three structural groups: • Infrastructure parameters (A), which ...
    ... that influence the evaluation of the method are operational costs, primary investments, costs during the working life and energy efficiency. Three steps were taken through the decision tree in order to reach a decision. The first step narrows the selection, based on technical limitations of the methods ...

  • Novel cerium and praseodymium doped phosphate tungsten bronzes: Synthesis, characterization, the behavior in the Briggs-Rauscher reaction and photoluminescence properties

    Tijana Maksimović, Pavle Tančić, Jelena Maksimović, Dimitrije Mara, Marija Ilić, Rik Van Deun, Ljubinka Joksović, Maja Pagnacco (2023)
    Due to the interesting and potentially useful properties, phosphate tungsten bronzes are constantly being studied and attract a lot of attention. In the present work, two different metallic elements, belonging to the group of rare-earth metals, cerium and praseodymium, were used as a dopants for phosphate tungsten bronzes. Novel cerium and praseodymium doped phosphate tungsten bronzes were successfully synthesized and further characterized by thermal analyses, Fourier-transform infrared spectroscopy, X-ray powder diffraction, scanning electron microscopy with energy-dispersive X-ray spectrometer and ...
    Electrical and Electronic Engineering, Atomic and Molecular Physics and Optics, Electronic, Optical and Magnetic Materials, Inorganic Chemistry, Organic Chemistry, Physical and Theoretical Chemistry, Spectroscopy

  • Synthesis and characterization of nanostructured Ca0.9Er0.1MnO3

    Tijana B. Vlašković, Bojana Laban, Maja Milošević, Maria Čebela, Vladimir Dodevski, Milena Rosić (2023)
    ... 10:10:30 Synthesis and characterization of nanostructured Ca0.9Er0.1MnO3 Tijana B. Vlašković, Bojana Laban, Maja Milošević, Maria Čebela, Vladimir Dodevski, Milena Rosić Дигитални репозиторијум Рударско-геолошког факултета Универзитета у Београду [ДР РГФ] Synthesis and characterization of nanostructured ...
    ... elektronska mikroskopija (SEM). Synthesis and characterization of nanostructured Ca„Er.,MnO, Tijana B. Vlašković-, Bojana Laban!, Maja Milošević?, Maria Čebelaš, Vladimir Dodevski*, Milena Rosić* _ University of Priština in Kosovska Mitrovica, Faculty of Sciences and Mathematics, Lole Ribara ...
    ... Nanostructured CaosSEro.,MnOx was synthesized by the sucrose-nitrate procedure (SNP). During this combustion method, sucrose Ci.H»Ori which is both fuel and complexant and metal ions in the form of calcium nitrate tetrahydrate, manganese(II) nitrate hydrate, erbium(III) nitrate pentahydrate were used. ...

  • The Fuzzy–AHP Synthesis Model for Energy Security Assessment of the Serbian Natural Gas Sector

    Aleksandar R. Madžarević, Dejan D. Ivezić, Miloš L. Tanasijević, Marija A. Živković (2020)
    Natural gas is used for the production of almost 20% of total energy today. The natural gas security of the Republic of Serbia is an urgent strategic, political and security issue. Serbia is one of the most vulnerable countries in Southeast Europe, because it only has one supply route. This study is a contribution to efforts to better understand the factors affecting energy security through the implementation of a new methodology based on the fuzzy–AHP synthesis model for measuring ...
    energetska bezbednost, prirodni gas, fazi AHP, AHP višekriterijumska analiza, fazi teorija
    ... indicator in the description of the synthesis indicator and to minimize the subjective influence of the model’s author. The multi-criteria AHP method uses the Satie scale of parameter significance assessment [61]. AHP matrix consists of relative Symmetry 2020, 12, 908 10 of 42 weights and its calculation ...
    ... matrix, as well as the values of the random consistency index and AHP indicator weight coefficients for the partial and synthesis indicators is presented in Table 28. Symmetry 2020, 12, 908 29 of 42 Table 28. Comparison of the influence of partials indicators on synthesis indicators, random consistency ...
    ... consistency index of the multi-criteria AHP method (for n = 3, RI = 0.58 [62]). The aforementioned ranking procedure using the AHP method was repeated for each partial indicator within each synthesis indicator. (IV) The fourth step in the formation of a synthesis model was the composition of partial indicators ...

  • Synthesis and characterization of high-pressure and high-temperature sphene (CaTiSiO5)

    Jelena Pantić, Vladimir Urbanovich, Vesna Poharc-Logar, Bojan Jokić, Marija Stojmenović, Aleksandar Kremenović, Branko Matović (2014)
    Sphene (CaTiSiO5), a calcium titanosilicate ceramic has been prepared from a powder mixture of CaCO3, TiO2 and SiO2 using vibro-milling for homogenization and activation of precursors. During the highpressure and high-temperature synthesis (HPS) process at 4 GPa and 1,200 °C, sphene undergoes into phase transition, from room-temperature phase P21/a to high-temperature phase A2/a. Evidence of that structural phase transition is given in this paper using infrared, Raman spectroscopy and X-ray powder diffraction. Rietveld refinement was employed to get the ...
    Sphene, Phase transition, Raman spectroscopy, X-ray diffraction, SEM, IR

  • BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1) Composites Synthesized by Thermal Decomposition: Magnetic, Dielectric and Ferroelectric Properties

    Marija Šuljagić, Ivan Petronijević, Miljana M. Mirković, Aleksandar Kremenović, Adis Džunuzović, Vladimir B. Pavlović, Aleksandra Kalezić-Glišović, Ljubica Andjelković (2023)
    To investigate the influence of spinel structure and sintering temperature on the functional properties of BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1), NiFe2O4, ZnFe2O4, and Ni0.5Zn0.5Fe2O4 were in situ prepared by thermal decomposition onto BaTiO3 surface from acetylacetonate precursors. As-prepared powders were additionally sintered at 1150 °C and 1300 °C. X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS) were used for the detailed examination of phase composition and morphology. The magnetic, dielectric, and ...
    ferroelectric, dielectric properties, magnetic properties, titanate/ferrite composites, phase composition
    ... magnetoelectric response [40], careful selection of ferrite chemical composition, as well as an attentive choice of synthesis protocol may serve to overcome such negative influence [43-45]. Many different methods were developed for the synthesis of nanocrystalline nickel- and zinc ferrites with tailored ...
    ... nanoparticles: Synthesis by the oil-in-water microemulsion reaction method and photocatalytic water-splitting, evaluation. f. J. Hydrogen Energy 2019, 44, 12421–12429. [CrossRef] Atiq, S.; Majeed, M.; Ahmad, A.; Abbas, S.K.; Saleem, M.; Riaz, S.; Naseem, S. Synthesis and investigation of structural, ...
    ... C.V.R.; Mendez, A.J. Synthesis and thermal decomposition of Co(IID), Ni(II), Cu(I1), Zn(II), Cd(II), and Pb(II) m-benzenedisulphonates. Thermochim. Acta 1993, 213, 199-210. [CrossRef] Fereshteh, Z.; Salavati-Niasari, M. Effect of ligand on particle size and morphologyy of nanostructures synthesized ...

  • Differently shaped nanocrystalline (Fe, Y)3O4 and its adsorption efficiency toward inorganic arsenic species

    Biljana P Dojčinović, Boštjan Jančar, Lotfi Bessais, Aleksandar Kremenović, Nataša P Jović-Jovičić, Predrag T Banković, Dalibor M Stanković, Miloš Ognjanović, Bratislav V Antić (2019)
    Herein we report effects of partial substitution of Fe3+ by Y3+ in magnetite (Fe3O4) on morphology and inorganic arsenic species adsorption efficiency of the Fe3−xYxO4 nanoparticles formed. The series of Fe3−xYxO4 (x=0.00, 0.042 and 0.084, labeled as Y00, Y05 and Y10, respectively) was synthesized using co-precipitation followed by microwave-hydrothermal treatment (MW) at 200°C. With increase of yttrium content(xvalue), both the morphological inhomogeneity of the samples and the fraction of spinel nanorods as compared to spinel pseudospherical particles increased. By ...
    microstructure, microwave-hydrothermal synthesis, adsorption, magnetic nanoparticles, arsenic

  • Application of the Fuzzy Model in the Evaluation and Selection of Hydraulic Excavators on Open-Pit Lignite Mine

    Stevan Đenadić, Miloš Tanasijević, Vladimir Milisavljević, Dragan Ignjatović, Predrag Jovančić (2021)
    The production of lignite in large open-pit mines is mainly performed with continuously operating equipment, where bucket-wheel excavators, bucket-chain excavators, belt conveyors, and spreaders are the basic machines. Smaller machines, usually of discontinuous operating nature, are commonly categorized as auxiliary machines. This paper presents the research related to the analysis of auxiliary machine parameters with the case study for a hydraulic excavator. The purpose of the analysis was to develop a model of rating quality of service of the ...
    Fuzzy theory, hydraulic excavator, selection, quality of service, asset management

  • Adsorption and degradation of some psychiatric drugs by sol-gel synthesized titania-based photocatalysts: influence of tungsten and sodium content

    Nina L. Finčur, Maja J. Šćepanović, Mirjana Grujić-Brojčin, Biljana F. Abramović, Jugoslav B. Krstić, Aleksandar Kremenović, Tatjana Srećković, Aleksandar Golubović (2019)
    Mesoporous anatase nanopowders were doped with 0.05−0.5 mol% of W6, in order to obtain more efficient photocatalyst than TiO2 Degussa P25 in the degradation of amitriptyline (AMI) under simulated solar irradiation (SSI). Dominant XRPD peaks were ascribed to anatase phase, with additional peaks which could correspond to brookite, TiO2 bronze and sodium titanate, Na2Ti9O19. The Raman scattering measurements have confirmed anatase as dominant phase, with broad Raman feature at ~270 cm−1 possibly related to Ti–O–Na stretching vibration. All W-doped ...
    Sol-gel synthesis, Doped titania nanopowders, XRPD, Raman spectroscopy, Adsorption and photocatalytic degradation, Psychiatric drugs

  • Development of the Availability Concept by Using Fuzzy Theory with AHP Correction, a Case Study: Bulldozers in the Open-Pit Lignite Mine

    Stevan Đenadić, Dragan Ignjatović, Miloš Tanasijević, Uglješa Bugarić, Ivan Janković, Tomislav Šubaranović (2019)
    Availability is one of the most used terms in maintainability engineering. This concept is used to denote: The quality of service of an engineering system, i.e., machines, weak points’ analysis, asset management, as well as making decisions in the process of life cycle management. Availability is an overall indicator and contains partial indicators that are oriented towards reliability, maintenance, and logistical support. Availability presents a variable value and changes in time and space. Usually, availability is shown as the ...
    raspoloživost, fazi teorija, AHP višekriterijumska analiza, eksperska ocena, buldozer
    ... the interval of 0 . . . 1. The questionnaires are statistically processed and translated into a fuzzy form. The second mode of the expert assessment is represented by the mutual ranking of partial indicators. In this paper, ranking is done using the AHP method. The Fuzzy-AHP synthesis model is represented ...
    ... be divided into several outcomes. The synthesis was made using the fuzzy theory and the AHP ranking model. The model is illustrated using the example of the bulldozer. Verification was made by comparing the results of the new model and the conventional method of calculating availability. The fuzzy-AHP ...
    ... estimation of the R indicator is obtained in the form: RB1−N = (0.450/‘A’, 0.525/‘B’, 0.025/‘C’) The same principle was used to calculate other indicators and machines. The results are shown in Tables 4 and 5 (rows marked with Σ). 3.2. AHP Ranking The AHP method was used to correct the influence of the ...

  • Influence of Ag doping on the morphological and magnetic properties in CuO nanopowders

    Maria Čebela, Uroš Čakar, Vesna Lojpur, Maja Milošević, Sanja Krstić, Vladimir Dodevski, Milena Rosić (2023)
    ... Petrology and Geochemistry, Faculty of Mining and Geology, University of Belgrade, Đušina 7, 11000 Belgrade, Serbia We studied the influence of Ag doping on the crystal structure and magnetic properties of CuO nanopowders. For the synthesis of nanoparticles of copper-silver oxides solid solutions. with ...
    ... I), University of Belgrade Institute of Physics, University of Belgrade Center of Excellence for the Synthesis, Processing and Characterization of Materials for use in Extreme Conditions "CEXTREME LAB” - Institute of Nuclear Sciences "Vinča”, University of Belgrade Faculty of Mechanical Engineering ...
    ... University of Belgrade Center of Excellence for the Synthesis, Processing and Characterization of Materials for use in Extreme Conditions “ĆCEXTREME LAB” – Institute of Nuclear Sciences “Vinča”, University of Belgrade Faculty of Mechanical Engineering, University of Belgrade Center of Excellence ...

  • Environmental Energy Security Indicators as Tools for Environmental Protection

    Aleksandar Madžarević, Dejan Ivezić, Marija Živković , Miloš Tansijević (2019)
    Еколошка прихватљивост је постала незаменљив синтезни показатељ сваке валидне енергетске анализе у последње две-три деценије. Енергетска безбедност је у директној хармонији с еколошком прихватљивошћу кроз многе прописане политичке циљеве, економске користи, правне тековине итд. Индикатори еколошке сигурности представљају један од основних елемената за одређивање енергетске безбедности и снажне алате за усмеравање енергетског сектора ка одрживом развоју. У овом раду, анализа је била концентрисана на показатеље енергетске безбедности у области животне средине који се односе на сектор природног гаса у ...
    енергетска безбедност, еколошки енергетски индикатори, заштита животне средине, еколошка прихватљивост
    ... based on the application of the AHP (Analytic Hierarchy Process) method was used for the purposes of developing this synthesis model. In this way, ranking data is used as input to the fuzzy set, which is further analyzed in the fuzzy composition process. As a result of the fuzzy composition, an ...
    ... partial indicator. 3.4 Synthesis of Environmental Acceptability The Environmental acceptability synthesis indicator is more closely defined by three partial indicators. Synthesis of this indicator is related to the composition of Emission of GHG (E1), Emissions of pollutants (E2) and Indirect ...
    ... political priorities and energy scenarios [2-4]. One of the key elements of energy policy in the Republic of Serbia, which has been actively promoted, is energy security. Energy security is a synthesis of the geopolitical and energy aspects of energy availability in various forms in satisfactory ...

  • Photocatalytic Activity of the V2O5 Catalyst toward Selected Pharmaceuticals and Their Mixture: Influence of the Molecular Structure on the Efficiency of the Process

    Sanja J. Armaković, Aleksandra Jovanoski Kostić, Andrijana Bilić, Maria M. Savanović, Nataša Tomić, Aleksandar Kremenović, Maja Šćepanović, Mirjana Grujić-Brojčin, Jovana Ćirković, Stevan Armaković (2023)
    Due to the inability of conventional wastewater treatment procedures to remove organic pharmaceutical pollutants, active pharmaceutical components remain in wastewater and even reach tap water. In terms of pharmaceutical pollutants, the scientific community focuses on -blockers due to their extensive (over)usage and moderately high solubility. In this study, the photocatalytic activity of V2O5 was investigated through the degradation of nadolol (NAD), pindolol (PIN), metoprolol (MET), and their mixture under ultraviolet (UV) irradiation in water. For the preparation of V2O5, facile ...
    DFT analysis, metoprolol, nadolol, nanomaterial characterization, photocatalysis, pindolol, β-blocker
    ... this research. Table 1. Some previous research on the photocatalytic activity of V)Os toward organic pollutants. Synthesis Method Compounds Irradiation Efficiency Reference Hydrothermal method After 180 min degradation of VOs pure vanadium žžl:hšlrzl;?cgš)(MO) Visible light MO was 82% and 21] pentoxide ...
    ... Powder Svynthesis The facile hydrothermal synthesis method was used to prepare V»Os powders [14,48]. For that purpose, 0.1 M ammonium metavanadate (NHaVOx) was dissolved in 80 mL of distilled water, resulting, in a pale yellow solution. To adjust the pH of the reaction solution to about 4, the diluted ...
    ... effect on the photocatalytic activity of V»Os for the degradation of phenols. J. Hazard. Mater. 2015, 286, 127–135. CrossRef] Chan, Y.-L.; Pung, S.-Y. Sreekantan, Synthesis of V>»Os nanoflakes on PET fiber as visible-light-driven photocatalysts for degradation of RhB dye. J. Catal. 2014, 2014, 370696 ...

  • Determining the Availability of Continuous Systems at Open Pits Applying Fuzzy Logic

    Miljan Gomilanović, Miloš Tanasijević, Saša Stepanović (2022)
    This work presents a model for determining the availability of continuous systems at open pits by applying fuzzy logic and fuzzy inference systems. The applied model was formed by the synthesis of independent partial indicators of availability. The model is based on an expert system for assessing the availability of continuous mining systems. The availability of the system, as a complex state parameter, is decomposed into the partial indicators, reliability, and convenience of maintenance, and the fuzzy compositions, used ...
    системи, континуални систем експоатације, површински коп, рударство, расположивост, фази логика, max–min композиција, min–max композиција

  • Investigation of Co0.9Ho0.1MoO4 Nanopowders Obtained by Glycine Nitrate Procedure

    Milena Rosić, Maja Milošević, Maria Čebela, Vladimir Dodevski, Vesna Lojpur, Radomir Ljupković, Aleksandra Zarubica (2023)
    ... nitrogen adsorption method. The photocatalytic activity of acquiring CoooHoo.MoO+4 nanopowders was estimated by the photocatalytic degradation of crystal violet in an aqueous solution. We present a simple and effective method for controlling the composition and morphology of CoooHooMoOu, as well ...
    ... Faculty of Natural Sciences and Mathematics, Ss. Cyril and Methodius University in Skopje, R. Macedonia COORGANIZERS: Minstry of Education and Science of Republic of Macedonia I _aonauue MHayka Ss. Cyril and Methodius University, Skopje 26th Congress of Chemists and Technologists of Macedonia ...
    ... University of Belgrade, P.O. Box 522, 11001 Belgrade, Serbia ? Department of Mineralogy, Crystallography, Petrology and Geochemistry, Faculty of Mining and Geology, University of Belgrade, Đušina 7, 11000 Belgrade, Serbia “ Department of Atomic Physics, Vinča Institute of Nuclear Sciences, National ...

  • Fuzzy Model for Risk Assessment of Machinery Failures

    Dejan V. Petrović, Miloš Tanasijević, Saša Stojadinović, Jelena Ivaz, Pavle Stojković (2020)
    The main goal of this research was the development of an algorithm for the implementation of negative risk parameters in a synthesis model for a risk level assessment for a specific machine used in the mining industry. Fuzzy sets and fuzzy logic theory, in combination with statistical methods, were applied to analyze the time picture state of the observed machine. Fuzzy logic is presented through fuzzy proposition and a fuzzy composition module. Using these tools, the symmetric position of the ...
    fazi teorija, rizik, otkaz rudarskih mašina
    ... potential for analysts to influence the outcome of an assessment. The proposed model offers the possibility of reducing the number of iterations when the number of combinations is defined in the process of determining possible outcomes. This method significantly expedites the process of calculating the symmetric ...
    ... risky event is based on the rules of fuzzy algebra. The fuzzy model for risk of failure assessment includes the following: • A risk assessment of partial indicators of element failure; • A risk level synthesis assessment of element failure; • A hierarchical synthesis of risk assessments for the technical ...
    ... min–max composition was also applied in the synthesis assessment of the risk level of system failure. The reason for this was given at the beginning of this section. Due to the high number of membership function combinations for the eight subsystems of the crushing machine C = j8, where j = 10 (100 ...

  • Effectiveness Analysis of Different Bucket-wheel Excavators

    Stevan Đenadić, Predrag Jovančić, Dragan Ignjatović, Miloš Tanasijević, Filip Miletić (2021)
    Coal production in open-pit lignite mines in the Republic of Serbia is performed with continuous work systems. In addition to coal production, the same systems are used for the exploitation of large quantities of overburden. According to the reliability concept, continuous systems are in linear connection. If the failure occurs in one part of the system, that will produce a downtime of the entire system. The initial and most important factor of continuous systems is the bucket-wheel excavator. It ...
    bucket-wheel excavator, open-pit coal mine, mining, multi-criteria decision methods