Претрага
2381 items
-
Development of the Cost-Based Model for Monitoring the Lifetime of the Earth Moving Machines
This paper presents the model for the identification of reference points on the lifetime curve of engineering systems. This curve commonly represents the increase and decline of failure in relation to time. A direct correlation between failure rate and costs is assumed in this paper, therefore, statistical and empirical analysis of costs provided reference points. This approach is used for positioning stages of the engineering system’s lifetime with a minimal number of failures and costs, regardless of whether these ...Electrical and Electronic Engineering,Industrial and Manufacturing Engineering, Control and Optimization, Mechanical Engineering, Computer Science (miscellaneous), Control and Systems EngineeringUgljesa Bugarić, Milos Tanasijević, Stevan Djenadić, Dragan Ignjatović, Ivan Janković. "Development of the Cost-Based Model for Monitoring the Lifetime of the Earth Moving Machines" in Machines, MDPI AG (2022). https://doi.org/10.3390/machines10110995
-
Influence of mono- and two-component organic modifiers on determination of lipophilicity of tetradentate Schiff bases
The infuences of the application of mono- and two-component organic modifers on lipophilicity determination of 12 tetradentate Schif bases by reversed-phase thin layer chromatography were investigated. The main goal is to estimate types of interaction between observed compounds and components of the applied chromatographic systems and establish some behaviour pattern in order to easier choose a combination of organic modifers which will simulate interaction in biological systems based on the facts that the same basic intermolecular interactions are responsible ...Materials Chemistry, Industrial and Manufacturing Engineering, General Chemical Engineering, Biochemistry,General ChemistryNikola Stevanović, Aleksandar Mijatović, Aleksandar Lolić, Mario Zlatović, Rada Baošić. "Influence of mono- and two-component organic modifiers on determination of lipophilicity of tetradentate Schiff bases" in Chemical Papers, Springer Science and Business Media LLC (2021). https://doi.org/10.1007/s11696-021-01884-5
-
Influence of mono- and two-component organic modifiers on determination of lipophilicity of tetradentate Schiff bases
The infuences of the application of mono- and two-component organic modifers on lipophilicity determination of 12 tet radentate Schif bases by reversed-phase thin layer chromatography were investigated. The main goal is to estimate types of interaction between observed compounds and components of the applied chromatographic systems and establish some behaviour pattern in order to easier choose a combination of organic modifers which will simulate interaction in biological systems based on the facts that the same basic intermolecular interactions are ...Materials Chemistry, Industrial and Manufacturing Engineering, General Chemical Engineering, Biochemistry, General ChemistryNikola Stevanović, Aleksandar Mijatović, Aleksandar Lolić, Mario Zlatović, Rada Baošić. "Influence of mono- and two-component organic modifiers on determination of lipophilicity of tetradentate Schiff bases" in Chemical Papers, Springer Science and Business Media LLC (2021). https://doi.org/10.1007/s11696-021-01884-5
-
Self-Engineering: Possibilities for Maintenance Operations in the Mining Machines Industry
Self-engineering is a relatively new branch of knowledge that aims to understand how systems could “autonomously” re-configure or repair themselves without the intervention of the operators. A direct field of application is within the maintenance spectrum. Having systems or machines capable of self-detecting or even self-repairing could represent a game-changer, in capital asset fields such as the mining industry in particular. This paper aims to investigate the possible benefits and challenges of self-engineering / self-maintenance concerning mining machines, specifically bucket-wheel ...self-engineering, self-maintenance, maintenance operations, mining industry, bucket-wheel excavator, gearbox revitalizationSteven Manders, Milorad Pantelić, Vladimir Milisavljević, Alberto Martinetti. "Self-Engineering: Possibilities for Maintenance Operations in the Mining Machines Industry" in SSRN Electronic Journal, Elsevier BV (2021). https://doi.org/10.2139/ssrn.3945979
-
Novel cerium and praseodymium doped phosphate tungsten bronzes: Synthesis, characterization, the behavior in the Briggs-Rauscher reaction and photoluminescence properties
Tijana Maksimović, Pavle Tančić, Jelena Maksimović, Dimitrije Mara, Marija Ilić, Rik Van Deun, Ljubinka Joksović, Maja Pagnacco (2023)Due to the interesting and potentially useful properties, phosphate tungsten bronzes are constantly being studied and attract a lot of attention. In the present work, two different metallic elements, belonging to the group of rare-earth metals, cerium and praseodymium, were used as a dopants for phosphate tungsten bronzes. Novel cerium and praseodymium doped phosphate tungsten bronzes were successfully synthesized and further characterized by thermal analyses, Fourier-transform infrared spectroscopy, X-ray powder diffraction, scanning electron microscopy with energy-dispersive X-ray spectrometer and ...Electrical and Electronic Engineering, Atomic and Molecular Physics and Optics, Electronic, Optical and Magnetic Materials, Inorganic Chemistry, Organic Chemistry, Physical and Theoretical Chemistry, SpectroscopyTijana Maksimović, Pavle Tančić, Jelena Maksimović, Dimitrije Mara, Marija Ilić, Rik Van Deun, Ljubinka Joksović, Maja Pagnacco. "Novel cerium and praseodymium doped phosphate tungsten bronzes: Synthesis, characterization, the behavior in the Briggs-Rauscher reaction and photoluminescence properties" in Optical Materials, Elsevier BV (2023). https://doi.org/10.1016/j.optmat.2023.114125
-
Towards a Mining Equipment Ontology
... in IT applications in mining engineering and other engineering disciplines whose importance is not always fully understood. Namely IT applications need proper and consistent use of terminology in order to build interoperable information systems. To that end engineering disciplines need terminological ...
... for mining engineering developed at the University of Belgrade Faculty of Mining and Geology, can be used for generating a mining equipment ontology. RudOnto is an integral part of a specialized mining engineering information system, which features functionalities for management and maintaining ...
... le in almost all mining engineering areas, including mining equipment management and maintenance. Basically, IT is introduced through computer-aided information systems, with the aim of securing reliable information for management and decision making in mining engineering systems [2]. Various IT ...Ranka Stanković, Ivan Obradović, Olivera Kitanović, Ljiljana Kolonja. "Towards a Mining Equipment Ontology" in Proceedings of the 12th International Conference Research and Development in Mechanical Industry, RaDMI 2012, September 2012, Vrnjačka Banja, Serbia no. 1, Vrnjačka Banja, Serbia : SaTCIP (Scientific and Technical Center for Intellectual Property) Ltd. (2012)
-
A fuzzy-based decision support model for effectiveness evaluation - a case study of examination of bulldozers
Effectiveness evaluation is one of the basic components of engineering asset management and maintenance engineering in general. Effectiveness is an overall concept representing a measurement of quality of service level for the analyzed engineering system. This concept contains a series of partial indicators relating to time in operation and time for maintenance activities, as well as functional properties of the system. This article describes the analysis and structuring of partial indicators, as well as the development of a model ...Miloš Tanasijević, Predrag Jovančić, Dejan Ivezić, Uglješa Bugarić, Radiša Đurić. "A fuzzy-based decision support model for effectiveness evaluation - a case study of examination of bulldozers" in International Journal of Industrial Engineering: Theory, Applications and Practice (2019)
-
Strategic Environmental Assessment in the Application of Preventive Protection for Wind Farm Noise—Case Study: Maestrale Ring Wind Farm
Determining the spatial position of wind turbines is the initial and most important phase in the development of a wind farm project. In this sensitive phase, all potential problems that may arise in the later stages of project development should be prevented by means of spatial and urban planning instruments. This makes it possible to achieve maximum use of the potential of wind in a particular space and, thus, fulfil the technical and economic requirements of the project while ...Energija,energetski inženjering i elektroenergetska tehnologija,obnovljivi izvori energije, održivost i životna sredina,električni i elektronski inženjering,kontrola i optimizacija,inženjering... 60 50 5 Town/city center, business, administrative zone with apartments, zones along highways and roads 65 55 6 Industrial, storage and service areas and transport terminals without residential buildings At the border of this zone, the noise must not exceed the limit value in the zone with ...
... flex- ible in relation to various precise models and tools used in environmental engineering and other areas based on scientific postulates of environmental impact assessment (EIA) [50– 53], the challenge was to select the appropriate techniques and methodology for assess- ment in the SEA process ...
... institutional; education 55 45 Industrial, commercial 70 70 Table 4. Excerpt from the table “SEA objectives and indicators” related to noise. (Source: SEA for the Urban Plan of the Maestrale Ring wind farm). Zone Purpose of the Space Noise Level, LAeq (dB) Day and Evening (Guidelines for Community ...Boško D. Josimović, Aleksandar Cvjetić, Božidar Manić. "Strategic Environmental Assessment in the Application of Preventive Protection for Wind Farm Noise—Case Study: Maestrale Ring Wind Farm" in Energies, MDPI AG (2021). https://doi.org/10.3390/en14196174
-
Analysis Of the Process Of Carbon Capture Utilization And Storage In Underground Reservoirs
John Nyame (2024)The importance of mitigating the effects of global climate change has necessitated an in-depth exploration of innovative strategies to reduce carbon dioxide (CO2) emissions. Among these strategies, Carbon Capture, Utilization, and Storage (CCUS) has emerged as a promising and transformative solution. This master thesis delves into the diverse realm of CCUS processes, aiming to unravel the positives challenges, and opportunities within this dynamic field. The analysis begins with a systematic examination of carbon capture technologies, encompassing post-combustion, pre-combustion, and oxy-fuel combustion ...... large-scale utilization stem from their manufacturing routes, which are very expensive, and their long-term stability and reliability. Polymeric membranes that can be easily formulated in fiber modules have shown tremendous potential for large-scale industrial applications [44]. Inorganic membranes ...
... regional industries, leading infrastructure and logistics operators, global engineering firms, and academic institutions in a plan to decarbonize the UK's largest industrial region. This will be enabled by shared trans-regional pipelines for low-carbon hydrogen and captured carbon emissions, creating ...
... captured for enhanced oil recovery and carbon-based products manufacturing and finally carbon underground storage and transport based on the economic, environmental and policy factors. Figures 1.2 and 1.3 show a background of the carbon capture and storage process (CCS) and an example of a full-scale ...John Nyame. Analysis Of the Process Of Carbon Capture Utilization And Storage In Underground Reservoirs, 2024
-
Simulation of Hydrogeological Environmental Discharge in Case of Interruption Constant Observations
Marina Čokorilo Ilić, Dragoljub Bajić, Miroslav Popović. "Simulation of Hydrogeological Environmental Discharge in Case of Interruption Constant Observations" in International Scientific Conference - Sinteza 2024, Belgrade, 16. maj 2024, Singidunum University (2024). https://doi.org/10.15308/Sinteza-2024-288-294
-
Robust IMC Controllers with Optimal Setpoints Tracking and Disturbance Rejection for Industrial Boiler
Ivezić Dejan, Petrović T. (2010)Ivezić Dejan, Petrović T.. "Robust IMC Controllers with Optimal Setpoints Tracking and Disturbance Rejection for Industrial Boiler" in Strojniški vestnik - Journal of Mechanical Engineering 56 no. 9, Ljubljana:University of Ljubljana, Faculty of Mechanical Engineering (2010): 565-574
-
A business intelligence approach to mine safety management
Ljiljana Kolonja, Ranka Stanković, Ivan Obradović, Olivera Kitanović, Dejan Stevanović, Marija Radojičić (2016)... mining engineering named RudOnto. Keywords: Business intelligence, Mine safety, Accident analysis, Online analytical processing (OLAP), Mine accident (injury) 1. Introduction Mine safety is one of the key issues in mining industry, and it is safe to say that research in industrial safety ...
... applied, which safety measures were followed, and the like. The medical report on the injury is also entered into the electronic form, and its most important parts are the classification of external causes of injury, injury severity assessment and specification of part or parts of the body that ...
... various mining engineering systems most often in the form of information systems, with the basic goal to secure reliable information for managers and decision makers. In addition to that, different ICT support systems and tools have been developed and implemented, such as diagnostic and prognostic ...Ljiljana Kolonja, Ranka Stanković, Ivan Obradović, Olivera Kitanović, Dejan Stevanović, Marija Radojičić . "A business intelligence approach to mine safety management" in 13th International Symposium Continuous Surface Mining, Beograd : Yugoslav Opencast Mining Committee (2016)
-
Development of terminological resources for expert knowledge: a case study in mining
Ljiljana Kolonja, Ranka Stanković, Ivan Obradović, Olivera Kitanović, Aleksandar Cvjetić. "Development of terminological resources for expert knowledge: a case study in mining" in Knowledge Management Research & Practice, Palgrave Macmillan (2015). https://doi.org/10.1057/kmrp.2015.10
-
Managing mining project documentation using human language technology
Purpose: This paper aims to develop a system, which would enable efficient management and exploitation of documentation in electronic form, related to mining projects, with information retrieval and information extraction (IE) features, using various language resources and natural language processing. Design/methodology/approach: The system is designed to integrate textual, lexical, semantic and terminological resources, enabling advanced document search and extraction of information. These resources are integrated with a set of Web services and applications, for different user profiles and use-cases. Findings: The ...Digital libraries, Information retrieval, Data mining, Human language technologies, Project documentationAleksandra Tomašević, Ranka Stanković, Miloš Utvić, Ivan Obradović, Božo Kolonja . "Managing mining project documentation using human language technology" in The Electronic Library (2018). https://doi.org/10.1108/EL-11-2017-0239
-
Application of VIКOR method in the selection of an optimal splution of excavation “Borska Reka” ore deposit
Sanja Bajić, Dragoljub Bajić, Branko Glušćević, Radmila Gaćina. "Application of VIКOR method in the selection of an optimal splution of excavation “Borska Reka” ore deposit" in 9th International Conference Mining and Environmental protection MEP, 24 – 27 May 2023, Sokobanja, Serbia , Belgrade : University of Belgrade-Faculty of mining and geology (2023)
-
Refinement of waste phosphogypsum from Prahovo, Serbia: characterization and assessment of application in civil engineering
Josip Išek, Lazar Kaluđerović, Nikola Vuković, Maja Milošević, Ivana Vukašinović, Zorica Tomić (2020)... according to the mineral origin, from 260 to 1860 Bq kg for apatite and from 460 to 640 Bq kg for phosphorite (Saueia, 1998). Through the manufacturing process, ~80% of ? 'Ra, 14% of ŠU and 30% of Th tend to be enriched in phosphogypsum, and the rest remains in phosphoric acid (Jung et al, 2017). This ...
... MPC(K) Q) where Cgax Crh and Ck are the measured concentrations and MPC (Ra), MPC(Th) and MPC(K) are the maximum permissible con- centrations of “Ra, Th and K, respectively. Equivalent values for building materials used for interior, exterior and civil engineering construction as a base for ...
... y-indices, with limiting values <1, the PG1 and PG2 samples should be rejected as materials for exterior and interior usage (Table 5) and may be used only in civil engin- eering construction as a base for roads, playgrounds and other civil engineering constructions. On the other hand, the PG1P sample ...Josip Išek, Lazar Kaluđerović, Nikola Vuković, Maja Milošević, Ivana Vukašinović, Zorica Tomić. "Refinement of waste phosphogypsum from Prahovo, Serbia: characterization and assessment of application in civil engineering" in Clay Minerals, Cambridge University press (2020). https://doi.org/10.1180/clm.2020.11
-
Developing Students’ Mining and Geology Vocabulary Through Flashcards and L1 in the CLIL Classroom
... Stanković | Proceedings of the Second International Conference on Teaching English for Specific Purposes and New Language Learning Technologies, May, 22-24, 2015, Niš, Serbia, Faculty of Electronic Engineering, University of Niš | 2015 | | http://dr.rgf.bg.ac.rs/s/repo/item/0001754 Дигитални репозиторијум ...
... Faculty of Mining and Geology archives faculty publications available in open access, as well as the employees' publications. - The Repository is available at: www.dr.rgf.bg.ac.rs The Second International Conference on Teaching English for Specific Purposes Faculty of Electronic Engineering University ...
... rs/profesor.php?id=219&lang=sr vocabulary with different techniques and heard them complaining about the difficulty of finding the best and most effective way to adopt demanding academic vocabulary and very challenging and complex engineering terminology. Vocabulary development of Serbian learners of English ...Lidija Beko, Ivan Obradović, Ranka Stanković. "Developing Students’ Mining and Geology Vocabulary Through Flashcards and L1 in the CLIL Classroom" in Proceedings of the Second International Conference on Teaching English for Specific Purposes and New Language Learning Technologies, May, 22-24, 2015, Niš, Serbia, Faculty of Electronic Engineering, University of Niš, Niš : Faculty of Electronic Engineering (2015)
-
The Importance of Geotechnical Investigations for the Construction of Transfer Station „Prelići“ on Landfill in Cacak – Serbia
For the purpose of the facilities construction within the transfer station „Prelici“ in Cacak, specific geotechnical investigations were carried out based on which the technological project with the facilities schedule was developed. Significant deviations in relation to the presented results were determined during earthworks, so the additional geotechnical investigation works were carried out. Since the new investigation works have determined a different cross section of the terrain, it was proposed to move the planned facilities which led to the ...... until further transport to the regional landfill „Duboko“. Part of the area is designed for temporary storage of specific waste (waste from electrical and electronic equipment, waste tiers, bulky household waste etc.). The transfer station complex itself contains technological units which are defined ...
... existing planning guidelines and • fitting structures and equipment into the urban industrial environment. In addition, an analysis of the available waste composition data and their comparison with the total mass of waste with data from different parts of the world and the average data for Serbia ...
... a dump since 1973, and then it has been placed out of the city area. However, by the urbanization of the city and especially by the expansion of the industrial zone, landfill has become the integral part of the inhabited area. The landfill covers an area of about 13.5 ha, and the estimated volume ...Dragoslav Rakić, Irena Basarić, Jovana Janković, Tina Đurić. "The Importance of Geotechnical Investigations for the Construction of Transfer Station „Prelići“ on Landfill in Cacak – Serbia" in 17th International waste management and landfill symposium, Proceedings SARDINIA 2019, CISA Publisher (2019)
-
Geochemical evaluation of dolostone deposits in Montenegro: Implications for potential industrial applications
Darko Bozovic, Vladimir Simic, Dragan Radulovic, Slobodan Radusinovic, Vesna Matovic, Anja Terzic (2024)This study presents a unique model for assessing the dependability of continuous parts of combined systems in open-pit mining through the application of fuzzy logic. Continuous sub-systems as part of the combined system of coal exploitation in surface mines have the basic function of ensuring safe operation, high capacity with high reliability, and low costs. These subsystems are usually part of the thermal power plant’s coal supply system and ensure stable fuel supply. The model integrates various independent partial ...примарне сировине, минералогија, физичко-механичка својства, технолошка својства, наука о материјалимаDarko Bozovic, Vladimir Simic, Dragan Radulovic, Slobodan Radusinovic, Vesna Matovic, Anja Terzic. "Geochemical evaluation of dolostone deposits in Montenegro: Implications for potential industrial applications" in Science of Sintering, Bor, August 2024, National Library of Serbia (2024). https://doi.org/10.2298/SOS240701029B
-
Microstructural and magnetic properties of electrospun hematite/cuprospinel composites
Phase composition, microstructural and magnetic properties of electrospun hematite/cuprospinel composites were investigated. Samples were synthesized starting with 0 to 10 mol% of copper relative to iron. The round shape of reference electrospun fbres was preserved upon their heating up to 600 °C in air, whereas at 700 °C hollow substructure was additionally formed. In these reference samples the presence of hematite phase was detected by XRPD. A small amount (traces) of Fe3O4 /γ-Fe2O3 was also found, due to the ...Electrical and Electronic Engineering, Condensed Matter Physics, Atomic and Molecular Physics and Optics, Electronic, Optical and Magnetic MaterialsMira Ristić, Aleksandar Kremenović, Michael Reissner, Željka Petrović, Svetozar Musić. "Microstructural and magnetic properties of electrospun hematite/cuprospinel composites" in Journal of Materials Science: Materials in Electronics, Springer Science and Business Media LLC (2020). https://doi.org/10.1007/s10854-020-03526-0