Претрага

Упит dcterms_subject_txt:Deformation modulus

40 items

  • A model for estimation of stress-dependent deformation modulus of rock mass

    Slavko Torbica, Veljko Lapčević (2019)
    Deformation modulus, Young’s modulus, Rock mass, Stress

  • Relation between crustal stress and thickness of earth's crust

    Slavko Torbica, Veljko Lapčević (2020)
    Crustal stress, Moho discontinuity, Deformation modulus

  • Correlation of uniaxial compressive strength with the dynamic elastic modulus, p –wave velocity and s –wave velocity of different rock types

    Jelena Majstorović, Miloš Gligorić, Suzana Lutovac, Milanka Negovanović, Luka Crnogorac (2019)
    Knowing mechanical properties of rocks incorporated with ultrasonic waves velocities investigations provide a secure basis for mine modelling. Uniaxial compressive strength, dynamic elastic modulus and ultrasonic waves velocities are just some of the rock properties that indicate on presence of discontinuities, stratification and fissures of rocks. Determining the relationship of these rock properties testing the rock samples that are corresponding to different rock types extracted from different mineral deposits represents the core of this study. In this paper, we ...
    линеарна регресија, метода најмањих квадрата, динамички модул еластиности, брзина уздужних таласа

  • Correlation Between Dynamic CBR and Compaction and Bearing Capacity of Pavement Foundation Layers

    Milan Bogdanović, Snežana Bogdanović, Dragoslav Rakić, Irena Basarić Ikodinović (2024)
    This paper presents a dynamic California Bearing Ratio (CBRd) device that can be used on a prepared pavement foundation layer to obtain a certain parameter of the tested material in the laboratory and in situ in a direct and fast way. For the selected natural material (gravel), it is shown that the laboratory CBRd can be used to estimate the compaction and bearing capacity, because it correlates well with the parameters of the standard and modifed Proctor compaction tests. ...
    korelacija parametara, donji slojevi saobraćajnica, laboratorijska i terenska ispitivanja, dinamički kalifornijski indeks nosivosti CBRd
    ... modified Proctor compaction tests. Comparative tests revealed that there is good correlation between the field CBR, and the deformation modulus, and dynamic deformation modulus values obtained by field tests. Introduction The compaction and bearing capacity of natural materials are the most important ...
    ... alternative to the SPLT, and measures the deformation (stiffness), that is, the level of compaction of the material, in situ and obtains the dynamic modulus of deformation (E„) [13, 14|. In Serbia, these devices are not widespread because the dynamic modulus is not considered in the quality assessment ...
    ... above, this paper also presents the correlations between the parameters obtained by the in-situ testing of the CBR+p, modulus of deformation (E,, —E,), and dynamic modulus of deformation (Ey„). The objective of regression analysis was to determine the parameters in the least-square error models, which ...

  • Laboratory testing of fly ash

    Miloš Šešlija, Aleksandra Rosić, Nebojša Radović, Milinko Vasić, Mitar Đogo, Milovan Jotić (2016)
    Fly ash is one of the most common waste materials created by burning of coal. It is composed of smaller particles, consisting mainly of aluminosilicate glass, mullite and quartz, which are collected by electrostatic separators (filter) of gaseous products arising from the combustion of coal. This paper presents the pozzolanic properties, mechanical properties, chemical and mineral composition of fly ash obtained in the combustion process in a power plant Nikola Tesla A (PPNT A) with the addition of a ...
    chemical composition, fly ash, mechanical properties, mineral properties, pozzolanic properties, X-ray diffraction
    ... experiment, was done according to the standard EN 13286-42 [19]. 2.4.3 The modulus of elasticity The modulus of elasticity represents the relationship between stress and deformation. Physical dimension of the modulus is the stress and is expressed in MPa. The experiment was done according to ...
    ... primarily to stabilized bearing layers. The development of this method allows the parameter assessment, such as tensile strength, tensile deformation, modulus of elasticity, Poisson's ratio, at fail and other mechanical properties. For the experiment the cylindrical shape samples were used D = ...
    ... 47 C 6 % 209,52 L 6 % 286,90 C 6 % 161,05 3.5.3 The modulus of elasticity After 7 days of the sample storage in the wet chamber, the modulus of elasticity was tested and was in range from 58.000 to 289.000 kPa. The maximum modulus of elasticity is obtained by adding 4 % of the cement as ...

  • The number of nonunimodular roots of a reciprocal polynomial

    Dragan Stankov (2023)
    We introduce a sequence Pd of monic reciprocal polynomials with integer coefficients having the central coefficients fixed as well as the peripheral coefficients. We prove that the ratio of the number of nonunimodular roots of Pd to its degree d has a limit L when d tends to infinity. We show that if the coefficients of a polynomial can be arbitrarily large in modulus then L can be arbitrarily close to 0. It seems reasonable to believe that if ...
    Algebraic integer, the house of algebraic integer, maximal modulus, reciprocal polynomial, primitive polynomial, Schinzel-Zassenhaus conjecture, Mahler measure, method of least squares, cyclotomic polynomials

  • Control of substructure construction of railways in the Republic of Serbia

    Dragan Lukić, Dragoslav Rakić, Irena Basarić Ikodinović (2022)
    Контрола збијености природног тла (у ископу) или збијеног у насипу при изградњи саобраћајница представља један од основних облика контроле квалитета доњег строја. Код изградње брзих саобраћајница (аутопутеви и брза железница) приоритет је постизање високог нивоа контроле извршених радова. У циљу онемогућавања диференцијалног слегања (при изградњи насипа), или промене запремине услед допунског збијања материјала, које неминовно доводе до деформација, потребно је извршити оптимално збијање материјала. У оквиру овог рада приказује се техничка регулатива која регулише контролу збијености при изградњи железничке ...
    доњи строј, техничка регулатива, насип, збијеност, контрола
    ... layer are given. Table 1 shows the required values of the dynamic modulus of deformation Evd together with the required values of the modulus of deformation Ev2. Determining the correlation coefficient between the deformation modulus Ev2 and Evd can be applied in special cases when soil 602 STEPGRAD2022 ...
    ... compaction and bearing capacity of the earth carcass layers is assessed by the static deformation modulus Ev2, which is determined by the test plate, while the control is performed by the dynamic deformation modulus Evd, which is determined by the light falling load experiment with base plate Ø300 mm ...
    ... determination of the dynamic modulus of deformation, Evd is obligatorily performed along with other tests and the stated correlation relations. Due to the fact that it is not standardized in the Regulations for main railways, tests by determining the dynamic modulus of deformation Evd are not even listed ...

  • The number of unimodular roots of some reciprocal polynomials

    Dragan Stankov (2020)
    We introduce a sequence P2n of monic reciprocal polynomials with integer coefficients having the central coefficients fixed. We prove that the ratio between number of nonunimodular roots of P2n and its degree d has a limit when d tends to infinity. We present an algorithm for calculation the limit and a numerical method for its approximation. If P2n is the sum of a fixed number of monomials we determine the central coefficients such that the ratio has the minimal limit. ...
    Algebraic integer, the house of algebraic integer, maximal modulus, reciprocal polynomial, primitive polynomial, Schinzel-Zassenhaus conjecture, Mahler measure, method of least squares, cyclotomic polynomials

  • Geotechnical conditions of “Debelo brdo” tunnel construction on the highway E-80: Nis-Merdare-Pristina (“Peace Highway”)

    Dragoslav Rakić, Irena Basarić Ikodinović, Radojica Lapčević, Dragan Lukić (2024)
    The construction of the highway E-80 has begun in Serbia, which will represent the traffic hub of the Western Balkans and will be part of the main regional transport network of Southeast Europe. Its total length through Serbia is 77 km, and one part of the route is designed through a typical plain terrain, while a larger part of the route passes through hilly terrain. The construction of the tunnel “Debelo brdo” is planned partly in an open cut ...
    „Debelo brdo“ tunnel, temporary slopes, open cut excavation, tunnel excavation, piles

  • On the distribution modulo 1 of the sum of powers of a Salem number

    Dragan Stankov (2016)
    It is well known that the sequence of powers of a Salem number θ, modulo 1, is dense in the unit interval, but is not uniformly distributed. Generalizing a result of Dupain, we determine, explicitly, the repartition function of the sequence , where P is a polynomial with integer coefficients and θ is quartic. Also, we consider some examples to illustrate the method of determination.
    Algebraic integer, the house of algebraic integer, maximal modulus, reciprocal polynomial, primitive polynomial, Schinzel-Zassenhaus conjecture, Mahler measure, method of least squares, cyclotomic polynomials

  • The Reciprocal Algebraic Integers Having Small House

    Dragan Stankov (2021)
    Algebraic integer, the house of algebraic integer, maximal modulus, reciprocal polynomial, primitive polynomial, Schinzel-Zassenhaus conjecture, Mahler measure, method of least squares, cyclotomic polynomials

  • A necessary and sufficient condition for an algebraic integer to be a Salem number

    Dragan Stankov (2019)
    We present a necessary and sufficient condition for a root greater than unity of a monic reciprocal polynomial of an even degree at least four, with integer coefficients, to be a Salem number. This condition requires that the minimal polynomial of some power of the algebraic integer has a linear coefficient that is relatively large. We also determine the probability that an arbitrary power of a Salem number, of certain small degrees, satisfies this condition.
    Algebraic integer, the house of algebraic integer, maximal modulus, reciprocal polynomial, primitive polynomial, Schinzel-Zassenhaus conjecture, Mahler measure, method of least squares, cyclotomic polynomials

  • Rock slope stability analysis under Hoek–Brown failure criterion with different flow rules

    Svetlana Melentijević, Zoran Berisavljević, Dušan Berisavljević, Claudio Olalla Marañón (2024)
    The stability analysis of homogeneous rock slope following the Hoek–Brown failure criterion under the hypothesis of different flow rules is performed based on limit equilibrium and finite element methods. The applied failure criterion is the generalized Hoek–Brown that can be introduced as a shear/normal function in analysis applying different flow rules. The results are compared with those obtained by the application of equivalent shear strength parameters of the Mohr–Coulomb criterion, considering that this is still the most widely used ...
    Kružna klizna površ, Huk-Braunov kriterijum loma, Kriterijum popuštanja, Smičuća/normalna funkcija, Nivo napona, Verovatnoća i parametarska analiza

  • Дефинисање параметра песковитог тла за потребе прорачуна слегања плиткох темеља преко CPTm и CPTu опита

    Александар Јаковљевић (2024)
    Дефинисање меродавних геотехничких параметара тла за потребе прорачуна слегања.(a и носивости)темељног тла један је од главних задатака инжењера геотехнике.Од поузданости ових параметара и последично резултата прорачуна слегања и носивости, директно зависи који ће се тип, врста и димензије темеља као и начин фундирања истог примењивати.Да би се поуздано дефинисали неопходни геотехнички параметри а потом и извели потребни прорачуни слегања, потребно је на првом месту познавање деформабилних карактеристика тла.Подаци о збијености тла могу се добити или лабораторијским испитивањима на претходно ...
    CPT, песак, слегање, параметри, корелације
    ... SPTeeo F. D Fridkon Constained _ _Shear Undrainned _ Undrained | OCR. - Unitweight Todepth — (m) (mis) _ (biows/30cm) |{MPa) - (%) ange modulus,M _ modulus,Go - strength,Su | strength (HN/m3) (m) (MPa) (MPa) (kPa) ratio 000 250 129606 56 OD | 0O 00 193 279 561 20 175 74 250 (a2.3ee-06) | (423) ...
    ... Thickness · Permeability SPTN6o Es D- Friction Constrained Shear Undrained Undrained OCR Unit weight To depth (m) (m/s) (blows/30cm) (MPa) angle modulus, M modulus, Go strength, Su strength (kN/m3) (m) (MPa) (MPa) (kPa) ratio 2.03 0.97 1.34E-05 10.6 33.3 46.5 38.3 41.7 41.7 0.0 0.0 0.0 17.4 3.00 (+1 ...
    ... Thickness · Permeability SPTN6o Es D- Friction Constrained Shear Undrained Undrained OCR Unit weight To depth (m) (m/s) (blows/30cm) (MPa) angle modulus, M modulus, Go strength, Su strength (kN/m3) (m) (MPa) (MPa) (kPa) ratio 0.33 1.97 6.99E-06 10.2 34.1 53.6 39.6 42.7 42.8 0.0 0.0 0.0 18.1 2.30 (+1 ...

  • Uporedna analiza stabilnosti završnih kosina površinskog kopa „Veliki Krivelj“

    Mihajlo Topalović (2023)
    Površinski kop „Veliki Krivelj“ nalazi se u blizina grada Bora i u neposrednoj blizini sela Krivelj. Od 2018. godine je u vlasništvu kineske kompanije „Zijin“ koja ima udeo od 63% vlasništva celokupnog RTB-a Bor. Na površinskom kopu obavlja se masovna eksploatacija rude bakra opremom visokog kapaciteta. Za bušenje se koriste bušilice prečnika od 250 do 310 mm, a za utovar minirane rude i jalovine bageri čija je zapremina kašike 15 m3 i 22 m3. Za površinski kop „Veliki Krivelj“ ...
    stabilnost kosina, metoda konačnih elemenata, površinski kop, Veliki Krivelj, završna kosina

  • Structural and geochronological constraints from the Drina-Ivanjica thrust sheet (Western Serbia): implications for the Cretaceous–Paleogene tectonics of the Internal Dinarides

    Kristof Porkoláb, Szilvia Kövér, Zsolt Benkó, Gabor Héja, Melinda Fialowski, Balázs Soós, Nataša Gerzina Spajić, Nevenka Đerić, László Fodor (2019)
    Internal Dinarides, Drina-Ivanjica thrust sheet, Deformation history, K–Ar dating, Obduction, Structural analysis
    ... Karamata et al., 2000; Schmid et al. 2008; Schefer 2012). To separate the deformation of the lower plate related to ophiolite emplacement from younger collision-related deformation, a clear view on the deformation history is fundamental. The Internal Dinaric structural units like the Studenica ...
    ... thrust sheet exposed along the northern rim of this thrust sheet. The timing of D, deformation is constrained by K/Ar ages suggesting 135—150 Ma tectonic burial for the Drina-Ivanjica thrust sheet. D, deformation and metamorphism is correlated with the closure of the Vardar ocean by top-W to NW ...
    ... 1966—71). The Car- boniferous rocks have experienced low-grade metamor- phism and multiple phases of deformation (Milovanovic 1984; Djokovic 1985; Trivic et al. 2010). However, the timing of deformation events is still unclear: the only available age constraints for the metamorphism of the Drina-Ivanjica ...

  • Стратешко планирање функционалности подземних просторија моделом прогнозе деформација

    Лука Црногорац (2023)
    Релативно велике деформације подградне конструкције у подземним рудницима угља у Републици Србији представљају један од главних проблема за постизање планиране производње угља. Деформације подграде су директна последица статичких и динамичких оптерећења стенске масе и у многоме зависе и од времена трајања изложености подграде утицају подземног притиска. Код ниско механизованог радног процеса долази до повећаног излагања подземних просторија утицају подземног притиска услед дугог производног циклуса који је често пропраћен застојима у раду. Веома често подземне просторије се санирају и по ...
    подземне просторије, подграда, прогноза деформација, стратешко планирање

  • Analysis of a simplified model for determining rock mass oscillation velocity at the Kovilovača open pit

    Suzana Lutovac, Miloš Gligorić, Jelena Majstorović, Luka Crnogorac (2023)
    ... ongitudinal elastic waves C, = 6661.00[m/ s] , • velocity of transverse elastic waves C, = 2852.67[m/ s] ; = 62.46[GN/m2], • dynamic elasticity modulus FE„ lin • „dynamic Poisson' ratio //„„ — 0.39|iGN/m2] . 6.2 Method of blasting in the open pit Kovilovača Measurements of seismic shocks in ...

  • Inženjerskogeološka istraživanja za potrebe izgradnje tunela T1 na putnom pravcu Požega-Kotroman

    Andrija Popović (2024)
    Tokom izrade završnog rada korišćeni su podaci koje sam dobio u saradnji sa firmom „Saobraćajni institut CIP d.o.o.“, kao i ostala odgovarajuća stručna literatura.Osnovni cilj pisanja rada jeste definisanje određenih fizičko mehaničkih parametara i predlog podgrade i načina iskopa tunela na osnovu RMR klasifikacije.
    stenska masa, RMR klasifikacija, tunel, inženjerskogeološka istraživanja
    ... | — Š 3 SAMPLEMARK — | Phisycalpropemies Consistepcylimits Pada o | < | Š| š| šB RR |Dectshear| - UU Water permeabiliy Oedometer compressibility modulus -slandardni | __ | KLASIFIKACIJA -4 i w š š| š 988 Š fest coefficient Š| TLA/Som Ež š iii i —| Classification Fž L Ša i H -4 ž P s|B Hi = = 55 |j ...
    ... STIŠLJIVOSTI / Proktorovopit| — Š _ SAMPLE MARK Phisycal properties. = ž| EO [-45-] Direct shear UU Water permeability Oedometer compressibility modulus - standardni | KLASIFIKACIJA Š š Consistency limits Particle size distibution | || ŠE Hi L e AAAO Fkv ) Ež š Š 8 i —| Classification Fi L Ša = H ...
    ... STIŠLJIVOSTI / Proktorovopit| — Š _ SAMPLE MARK Phisycal properties. = ž| EO [-45-] Direct shear UU Water permeability Oedometer compressibility modulus - standardni | KLASIFIKACIJA Š š Consistency limits Particle size distibution | || ŠE Hi L e AAAO Fkv ) Ež š Š 8 i —| Classification Fi L Ša = H ...

  • Investigation of quantitative indicators of anisotropy based on longitudinal elastic waves propagation velocities with uncertainty

    Miloš Gligorić, Jelena Majstorović, Suzana Lutovac (2018)
    ... use for creating reliable models. Further researches can be related to determine correlation between other mechanical properties such as Young’s modulus, Poisson’s ratio, bulk density and compressive strength in order to create an dynamic model of anisotropy investigation. Acknowledgement This ...
    ... several times per second because of its shortness, so this method is called impulse method. Elastic waves in rock or sample are representing deformation propagation, so depending of type of deformations, waves of different types can be caused: a) longitudinal waves b) transversal waves Today ...
    ... London: Taylor and Francis Group plc; pp. 749-756 PETRUŽÁLEK M. et al. (2008) Changes of anisotropy of p-wave velocity propagation during deformation process of rock samples. In: 28-European Conf. AE Testing, Ewgae 2008, Cracow UT. Cracow. SOUSA L. M. O. et al. (2005) Influence of microfractures ...