Претрага

Упит dcterms_subject_txt:директно коришћење УПГ-а

1575 items

  • Structural characterization of traditional pottery produced from local clay, Rujište (Ražanj, Central Serbia), in an effort to preserve its geoheritage

    Maja Milošević, Biljana Đorđević, Alena Zdravković (2021)
    ... diffraction) were made. Studies conducted with a scanning electron microscope (SEM) equipped with a detector for secondary electrons (SE), back-scattered electrons (BSE), modern energy-dispersive spectrometer (EDS), a wavelength-dispersive spectrometer (WDS) and a cathodoluminescence detector (CL) were ...
    ... optimal way of making these ceramic vessels. Nothing else can be made from these raw clays, nor can these pots be made with the help of a mechanical device – a potter's wheel, which was empirically tested over the years. Investigation of the pottery was conducted to show the main characteristics ...
    ... which is intimately mixed with clay of the illite type with a very smaller amount of detrital quartz and feldspar (Krstić et al., 1980). In the analysis of the thin sections made of the sample, the basic mass is observed, which represents a sintered fine-grained aggregate and binds large, often idiomorphic ...

  • Project REASONING: Characterization and technological procedures for recycling and reusing of the rudnik mine flotation tailings

    Vesna Cvetkov, Vladimir Simić, Stefan Petrović, Filip Arnaut, Milena Kostović, Dragan Radulović, Jovica Stojanović, Vladimir Jovanović, Dejan Todorović, Nina Nikolić, Jelena Senćanski, Grozdanka Bogdanović, Dragana Marilović (2024)

  • Developing Termbases for Expert Terminology under the TBX Standard

    http://drug.rgf.bg.ac.rs/s/repo/item-set/522 (2014)
    ... Serbian: the right-hand side features a tree structure providing a hierarchical view of entries, with more detailed information on a selected term in Serbian to be found on the left-hand side. In this detailed view, the term itself is displayed as a subtitle, on top of a tree structure showing its place within ...
    ... TBX data-categories: 1. A core-structure module data-category is any data-category that is defined in the core-structure module DTD as a XML element. 2. A meta data-category is a general data-category used to group similar data- categories together. It is implemented as a core-structure module data-cate- ...
    ... Standard 19 gory (XML element) with a type attribute. The type attribute values are derived from ISO 12620:2009 and listed in a XCS file. 3. A terminological data-category is an instance of the meta data-category with a particular value of the type attribute. A value of the type attribute represents ...

  • Transformer-Based Composite Language Models for Text Evaluation and Classification

    Mihailo Škorić, Miloš Utvić, Ranka Stanković (2023)
    Parallel natural language processing systems were previously successfully tested on the tasks of part-of-speech tagging and authorship attribution through mini-language modeling, for which they achieved significantly better results than independent methods in the cases of seven European languages. The aim of this paper is to present the advantages of using composite language models in the processing and evaluation of texts written in arbitrary highly inflective and morphology-rich natural language, particularly Serbian. A perplexity-based dataset, the main asset for the ...
    General Mathematics, Engineering (miscellaneous), Computer Science (miscellaneous)

  • Mine surveying works for the purpose of excavating the remaining reserves of bauxite in the deposit of “Podbracan”

    Aleksandar Milutinović, Aleksandar Ganić, Thamer Rayes Diyab, Rade Tokalić, Meri Ganić (2015)
    ... the a priory accuracy assessment within the horizontal and vertical planes. 6.1. A priori accuracy assessment for setting out of the designed mine chambers within the horizontal plane The setting out of the designed mine chambers within the horizontal plane is to be carried out by using a polar ...
    ... , , 22 , 0 0 N N ET d N E N E E N N N E d d d K A K A E E N E d ν σ σσν σ σσ ν ν ν Δ Δ Δ Δ Δ Δ Δ Δ ∂Δ ∂Δ ∂Δ ∂Δ⎡ ⎤ ⎡ ⎤ ⎢ ⎥ ⎢ ⎥ ⎡ ⎤⎡ ⎤∂ ∂ ∂ ∂= ⋅ ⋅ = ⋅ ⋅ =⎢ ⎥ ⎢ ⎥ ⎢ ⎥⎢ ⎥∂Δ ∂Δ ∂Δ ∂Δ⎢ ⎥ ⎢ ⎥⎣ ⎦ ⎣ ⎦ ⎢ ⎥ ⎢ ⎥∂ ∂ ∂ ∂⎣ ⎦ ⎣ ⎦ Whereby: A - the coef�cient matrix (Jacobian matrix) that represents ...
    ... but in the meantime, this paper shows the a priory accuracy assessment of the spatial position of the point, it being the exit point to the existing bench of the open pit at the elevation +420m. keywords: underground mining, bauxite mine, mine surveying, a priori accu- racy assessment. Aleksandar ...

  • Ground surface subsidence monitoring using sentinel-1 in the “Kostolac” open pit coal mine

    Zoran Gojković, Milan Kilibarda, Ljiljana Brajović, Miloš Marjanović, Aleksandar Milutinović, Aleksandar Ganić (2023)
    Open pit coal mining affects surrounding populated areas, resulting in terrain surface deformation. Surface deformation should be monitored as often as possible to control deformations and prevent potential incidents. This paper analyzes time series deformation estimated from the Sentinel-1 satellite images using the Persistent Scatterer Interferometry method to monitor subsidence rates caused by open pit mining activities. It is possible to measure deformations using classical geodetic methods, but those are rarely used in practice because they are time-consuming and ...
    Sentinel-1 InSAR, слегање, рударствo, интерферометрија, даљинска детекција, Костолац

  • Development of the hybrid MCDM model for evaluating and selecting bucket wheel excavators for the modernization process

    Snezana Savkovic, Predrag Jovancic, Stevan Djenadic, Milos Tanasijevic, Filip Miletic (2022)
    This paper presents a methodology for evaluating and ranking different bucket wheel excavators (BWE) for determining which machine should enter in the process of revitalization and modernization. Various multicriteria methods are used. Combining them achieves the best effect when choosing BVE for the modernization process. AHP, TOPSIS, VIKOR, and PROMETHEE methods are used. The hybrid models are developed from the multi-criteria decision making (MCDM) methods and they are used to evaluate the basic indicators that characterize the operation of ...
    višekriterijumsko odlučivanje, rotorni bageri, modernizacija, ekspertska analiza

  • Sinteza i karakterizacija vanadata alkalnih metala sa elementima retkih zemalja

    Anđela Jovanović (2024)
    Predmet i cilj pisanja ovog rada su sinteza i karakterizacija vanadata alkalnih metala sa elementima retkih zemalja. Prilikom ovih istraživanja, ispitivan je sistem REE2O3–V2O5–KF, gde REE predstavlja trovalentni katjon izabranih elemenata retkih zemalja (Y, Sm, Eu, Gd, Er, Yb). Ovo istraživanje bazirano je na sintezi kristala, nakon čega su dobijeni kristali posmatrani pod binokularnom lupom, analizirani metodom rendgenske difrakcije na polikristalnom materijalu (XRPD) i metodom skenirajuće elektronske mikroskopije sa energetsko-disperzivnom spektroskopijom (SEM-EDS), kako bi se utvrdile karakteristike dobijenih kristala. ...
    elementi retkih zemalja, sinteza kristala metodom fluksa, vanadati alkalnih metala, rendgenska difrakcija, SEM-EDS metoda

  • Uticaj finoće mlevenja rude rudnika Grot na tehnološke rezultate

    Ivana Božović (2024)
    Diplomski rad sa temom „Uticaj finoće mlevenja rude rudnika Grot na tehnološke rezultate” sastoji se iz dva dijela, opšteg i eksperimentalnog. U opštem dijelu prikazani su: * Istorijski razvoj rudnika „Grot”; * Geografski položaj rudnika „Grot”; * Geološke karakteristike ležišta; * Mineralni sastav i strukturno-teksturne karakteristike; * Prikaz postupaka pripreme mineralnih sirovina koji se primjenjuje u pogonu; * Opis šeme procesa; U drugom dijelu ovog završnog rada prikazani su rezultati eksperimentalnih ispitivanja koja su obuhvatila: uzorak, mineralnu sirovinu, hemijske analize i tehnološka ispitivanja. Na kraju ovog rada dati ...
    flotacijska koncentracija, olovo-cinkova ruda, Grot
    ... mase a zatim do naglog smanjenja, što se sadržaja Pb tiče na osnovu krive se vidi da takođe dolazi do prvobitnog povećanja a zatim naglog smanjenja sadržaja. Sadržaj Zn u GK/Zn se prvo neznatno povećava pa zatim isto tako neznatno smanjuje, dok iskorišćenje Pb i Zn prvobitno opada neznatno a zatim ...
    ... minerala olova dobijen je nešto bolji kvalitet GK/Pb nego u prethodnom opitu sa oko 27 % Pb i sa veoma niskim iskorišćenjem olova od oko 35% što je direktna posledica manje finoće mlevenja. Gubitak cinka kroz GK/Pb Je i dalje niži nego u opitu broj 1 i iznosi oko 13 %. Gubitak olova u jalovini je sličan ...
    ... Morave. Istočnu polovinu terena drenira reka Dragovištica koja se u Bugarskoj uliva u Strumu, a jugozapadni deo Pčinja. Teren je najvećim dijelom izgrađen od kristalastih škriljaca, pretežno staropaleozojske a manjim dijelom proterozojske starosti, u koje su utisnute veće i manje mase paleozojskih ...

  • Хидротермалне промене у издвојеним стратиграфским јединицама у бушотини јужно од Бора

    Павле Јовичић (2024)
    Анализом уступљених узорака из истражне бушотине јужно од Бора, од стране компаније Serbia Zijin Mining, утврђене су хидротермалне промене (алтерације) које прате стратиграфске чланове набушене самом бушотином. Установљене алтерације директно осликавају класично развиће порфирског Cu система, при чему је указано на њихову повезаност са минерализацијом, као и на потенцијалност самог истражног простора којем изабрана бушотина припада.
    Бор, хидротермалне промене, порфир

  • Geološke karakteristike neogenih sedimenta na prostoru šire okoline Ledinaca

    Aleksandar Tričković (2024)
    Sagledavanje evolucije neogenih sedimenata na prostoru šire okoline sela Ledinci omogućeno je primenom različitih stratigrafskih metoda na površinskim i potpovršinskim podacima. Za izradu rada korišćene su sedimentološke, biostratigrafske, geofizičke i riftno sekvencione metode, koje su primenjene na površinskim izdancima i bušotinama. Primenom principa riftne sekvencione stratigrafije na podacima dobijenim geofizičkim karotažnim merenjima dobijeni su podaci o vremenu ekstenzije u Panonskom basenu. Pored toga ovi podaci zajedno sa sedimentološkim i stratigrafskim metodama omogućili su izdvajanje depozicionih sredina tokom neogena. Generalno ...
    depozicioni sistemi, neogen, Panonski basen, ekstenzija, formacije, riftna sekvenciona stratigrafija
    ... aaaaa a rananaataaaaaaaakaktve 5 3. MATERIJALI I METODE .......aa a aaaaaaataaaakakaoi 9 4. REZULTATI ... aaaaaaaaaaaaaaaaaaaaaatatott 14 4.1 Površinska istraživanja ... aaaaaaaaakakoaoi 15 4.2 Potpovršinski podaci .....caaaaaaaaaaa a aana a aaaaaeaaaakatati 26 5. DISKUSIJA .....aa a tanaa ...
    ... cTy/IeHTa AJ\Q( AA (gl'l ··l 11 LL Bpoj aHnekca __f “A D a Cryaujckui nporpaM fere OMA J\MA— reojor JA Hacnos pana _{eepegce __CAPKiCPecILVO MA __opecot» Mwfe Ooke neh o HeoreHt OL HA 7A ltA A MeHTop _eeb re Tfeqh _Pa/ueejcW,h HiyjanubyjeM a je urraMnaHa Bep3Hja Mor 3aBpuiHor pajla HcTOBeTHa ...
    ... tanaaaaaaaaeaaaaaataket 30 6. ZAKLJUČAK a aiaai iii aaaa iii a iaaanka 33 ZAHVALNICA ... ana a aaaaaaaaataaaaaaaaaaakateee 34 |D :0.0. V BJ 20 OIAAA 35 1. UVOD U radu su prikazani rezultati proučavanja litoloških, sedimentoloških, stratigrafskih i geofizičkih karakteristika neogenih sedimenata ...

  • The optimization of auxiliary machinery in open-cast lignite mines: a case study of bulldozers

    Dragan Ignjatović, Predrag Jovančić, Stevan Đenadić, Ivan Janković, Ivica Ristović (2019)
    One of the most important prerequisites for the successful operation of the open-cast lignite mine is to carry out all the auxiliary works timely with the necessary quality. The most important and most commonly used auxiliary machines are bulldozers. Engaging time of bulldozers use is in direct relation with the coefficients of the time and capacity utilization of the continuous system for the excavation of coal and tailings, which indicates their importance. More than 100 bulldozers have been hired ...
    open-cast coal mine, auxiliary works, bulldozers, optimization, availability
    ... increasing rate of failures. A о Area ог decreasing Area of constant Area ofincreased 3 failure rate , failure rate | failure rate G > » » д 1 ı — || ı о 1 || о || || — ı || ~ ı 1 c 1 ı ı 1 1 ı ı ı ı ı ı ı а зЖ - Time Figure 5. "Bath tub" curve, a relatioh of time апа failure ...
    ... lignite mines: a case study of bulldozers Dragan Ignjatović, Predrag Jovančić, Stevan Đenadić, Ivan Janković, Ivica Ristović Дигитални репозиторијум Рударско-геолошког факултета Универзитета у Београду [ДР РГФ] The optimization of auxiliary machinery in open-cast lignite mines: a case study of ...
    ... иИ 2000 - / es / —о— Аџегаве геа!7еа moto hours — — Ауегаве рјаппеа stoppages 1000 + —-—Average ипрјаппеа stoppages 500 4 + Tr ту — А А Ак.к Д 0 т т 7 т т т — 7 1.year 2. уеаг 3. уеаг 4. уеаг 5. уеаг 6. уеаг5 7. уеаг5 8. уеаг5 9. уеаг5 10. уеаг5 Figure 1. Тће акегаре number ој achieved ...

  • Development and evaluation of fracture gradient curve model: a case study of south-central Kazakhstan

    Branimir Stanisavljevic, Vesna Karovic Maricic, Irena Isakov (2022)
    An accurate fracture gradient value is one of the most important issues in oil and gas well design and drilling. The value of a fracture gradient is a critical parameter for determining the drilling mud weight and selecting the proper depths for setting the casing in the planning process of drilling operations. This paper proposed the new curve model of fracture gradient for the south-central Kazakhstan (central Asia) region based on the analysis of leak-off test and format integrity ...
    gradijet frakturiranja, model nove krive, projektovanje naftne bušotine, Kazahstan

  • A contribution to the understanding of hydrochemical properties of thermomineral water on the L’dži locality (eastern part of North Macedonia)

    Hristina Petrova, Katarzyna Wątor, Piotr Rusiniak, Boris Vakanjac, Vesna Ristić Vakanjac, Ewa Kmiecik (2023)
    Regarding the aspect of mineral, thermo-mineral, and thermal waters, on the territory of the Republic of North Macedonia, there are 65 registered locations, of which 8 are categorized as spas. This includes the Kežovica spa, also known as the Štipska spa. In the vicinity of Kežovica Spa is the thermo-mineral L’Dži spring with mineralization around 1.3 g/L and the water temperature at the time of sampling was 50.1 °C. Spring L’Dži is generated by a fault structure and is ...
    thermo-mineral water, water chemistry, hydrochemical properties, L’dži locality, North Macedonia.

  • Increasing the Local Road Network Resilience from Natural Hazards in Municipalities in Serbia

    Biljana Abolmasov, Miloš Marjanović, Ranka Stanković, Uroš Đurić, Nikola Vulović (2024)
    lokalni putevi, prirodni hazardi, otpornost na klimatske promene, MaPLoRds

  • BEYOND 2020 - Geology explorations and open pit activities affectation in reclamation designing in Kolubara Coal Mines (KCM) Serbia, new considerations

    Bojan Dimitrijević, Bogoljub Vučković, Radmila Gaćina (2023)
    Geology explorations in KCM runs from 1936. year up to these days and still ongoing. Results in >7,200 drill holes with ≈600,000 m of core drilling and gave lignite ore resources of > 4,1Bt, which 1,15Bt are excavated since 1986. of XIX up to early years of XXI century. For further mining operations in open pits stay 1,5Bt of lignite. Under waste heaps are ≈80 km2, additional 85 km2 should be filled. All of that masses/areas were, are ...

  • Granatski amfiboliti Bistrice

    Jovana Opančina (2024)
    Predmet ispitivanja ovog završnog rada su granatski amfiboliti Bistrice. Izvršena su petrografska i hemijska ispitivanja s ciljem da se odredi stepen metamorfizma, protolit ispitivanih stena i P-T uslovi nastanka. Ispitivani granatski amfiboliti geografski pripadaju Prijepolju, tačnije nalaze se na ulasku u Prijepolje, mesto Bistrica. Geološka građa obuhvata uglavnom mezozojske tvorevine među kojima se nalaze sedimentne, magmatske i metamorfne stene. Geološki procesi koji su doveli do stvaranja amfibolita su procesi subdukcije i obdukcije koji su se pretpostavljamo dešavali na većim ...
    granatski amfiboliti, Bistrica, elektronska mikrosonda, polarizacioni mikroskop

  • Multi-Criteria Fuzzy-Stochastic Diffusion Model of Groundwater Control System Selection

    Dušan Polomčić, Zoran Gligorić, Dragoljub Bajić, Miloš Gligorić, Milanka Negovanović (2019)
    When considering data and parameters in hydrogeology, there are often questions of uncertainty, vagueness, and imprecision in terms of the quantity of spatial distribution. To overcome such problems, certain data may be subjectively expressed in the form of expert judgment, whereby a heuristic approach and the use of fuzzy logic are required. In this way, decision-making criteria relating to an optimal groundwater control system do not always have a numerical value. Groundwater control scenarios (alternatives) are identified through hydrodynamic ...
    expert judgment, linguistic variables, fuzzy dynamic TOPSIS, hydrogeology, groundwater control system, open-cast mine, geometric Brownian motion

  • Organoselenium functionalized oxacycles as ligands in some trans-palladium(II) complexes: biological evaluation and interaction with small biomolecules

    I. Raković, D. Ćoćić, O. Milošević-Djordjević, I. Radojević, M. N. Živanović, K. Virijević, J. Pavić, J. Tubić Vukajlović, A. Marković, J. S. Marjanović, M. D. Kostić, P. Čanović, A. Mijatović, V. M. Divac (2023)
    In this article, the biological evaluation and interaction of three selenium-based trans-palladium complexes (Pd–Se1, Pd–Se2, and Pd–Se3) with small biomolecules were performed. The UV–Vis kinetic studies on substitution reaction of synthesized complexes with selected biologically important N- and S-bonding ligands (LCys, GSH, L-Met, 50-GMP, L-His) has emphasized greater affinity of sulphur-based ligands for complex-binding, while the general order of the reactivity was L-Cys > GSH > L-Met > 50-GMP > L-His. The complex reactivity toward small biomolecules is influenced ...
    Materials Chemistry, Physical and Theoretical Chemistry

  • Аnaliza mogućnosti povećanja nagiba završne kosine površinskog kopa “Podbraćan”

    Vladimir Čebašek, Veljko Rupar (2018)
    Eksploatacijom boksita iz ležišta "Podbraćan" formiran je površinski kop sa maksimalnom visinom zavšne kosine od 280 m. Redovnom kontrolom stabilnosti trenutnog stanja kosina površinskog kopa utvrđeno je da faktor sigurnosti iznosi Fs = 1.71 – 1.85, a što je ukazalo da postoji mogućnost povećanja nagiba kosine. U radu je prikazan postupak analize mogućnosti povećanja nagiba završne kosine površinskog kopa "Podbraćan".
    stabilnost kosina, povećanje nagiba kosina, metoda konačnih elemenata