Претрага

Упит dcterms_subject_txt:unit weight

140 items

  • Determination of Mechanical Properties of Altered Dacite by Laboratory Methods

    Veljko Rupar, Vladimir Čebašek, Vladimir Milisavljević, Dejan Stevanović, Nikola Živanović (2021)
    This paper presents a methodology for determining the uniaxial and triaxial compressive strength of heterogeneous material composed of dacite (D) and altered dacite (AD). A zone of gradual transition from altered dacite to dacite was observed in the rock mass. The mechanical properties of the rock material in that zone were determined by laboratory tests of composite samples that consisted of rock material discs. However, the functional dependence on the strength parameter alteration of the rock material (UCS, intact ...
    Geology, Geotechnical Engineering, Engineering Geology
    ... Strength—UCS (σci UCS) The unit weight (determined with paraffin) and the water content of the rock material were determined on samples of dacite and altered dacite. Unit weight tests were performed on 100 samples: 50 samples of dacite and 50 samples of altered dacite. The unit weight values in the altered ...

  • Димензионисање камионског транспорта јаловине на површинском копу Угљевик Исток 1

    Наталија Терзић (2024)
    Напредовањем рударења дошло је до потребе за експлоатацијом сложенијих и сиромашнијих лежишта, самим тим и повећањем трошкова.Профитабилна експлоатација лежишта минералних сировина захтева детаљну анализу свих техничко-економских фактора.Два најутицајнија фактора на профитабилност експлоатације руде јесу откопавање и транспорт, због тога је неопходно направити изводљив стратешки план који ће бити у складу са свим ограничењима и омогућити испуњавање свих планираних резултата.Транспорт на површинским коповима одвија се паралелно са осталим процесима експлоатације, стога је неопходно да сви системи буду усаглашени како не ...
    дисконтинуални транспорт, откривка, транспортне трасе, Тalpac, капацитет, камион, багер
    ... Factor |_ _ 1.00 Weight Modification Database Truck Payload | 90.00| tonne equiv.to | 83.33|cu metres Standard Body Capacity of this tuuck | 53.30| cumetres Empty Truck Weight | 74.00| tonne Actual Truck Payload | 57.56| tonne equiv.to | 53.30|cu metres Full Truck Weight |131.56| tonne |:7]| ...
    ... pao Hamanuja Tepsuh p8/18 [PRJ] Default Report Production Measurement - |tonne | Cunently Selected Run |_ Base Run (e)\Weight (— Bank Volume ()Loose Volume () ProductBy\Weight Cmaka 28. OnraMunanuja Opoja kaMHoHa 32 CHCTEM | Haul Cycie: [PRI] Trasa1 Roster: [PRu] 7 day Week - 8 Hour SNifts, ...

  • A comparative study of the molecular and isotopic composition of biomarkers in immature oil shale (Aleksinac deposit, Serbia) and its liquid pyrolysis products (open and closed systems)

    Gordana Gajica, Aleksandra Šajnović, Ksenija Stojanović, Jan Schwarzbauer, Aleksandar Kostić, Branimir Jovančićević (2021)
    The molecular and isotopic composition of biomarkers in initial bitumen isolated from immature (0.41% Rr) oil shale samples (Aleksinac deposit) and liquid products obtained by pyrolysis in open (OS) and closed (CS) systems are studied. The influence of pyrolysis type and variations of kerogen type on biomarkers composition and their isotopic signatures in liquid products is determined. The applicability of pyrolysis type, numerous biomarkers and carbon isotopic compositions (δ13C) of n-alkanes in liquid pyrolysates is established. Pyrolysis experiments were ...
    Uljni šejl, Aleksinac, organska supstanca, otvoreni i zatvoreni sistem pirolize, biomarkeri, izotopski sastav ugljjenika

  • Availability as a dimension of energy security in the Republic of Serbia

    Boban Pavlović, Dejan Ivezić (2016)
    There is a range of modern approaches and models in literature for the evaluation and determination of energy security, which are based on different parameters and indicators. For most of them, a common characteristic is emphasizing the avail ability of energy, as an important dimension for ensuring energy security. In this paper, concise overview of Serbian energy sectors is given and appropriate energy indicators are defined and determined. Selected indicators provide insight into the main components that characterize availability ...
    raspoloživost energije, energetski indikatori, energetska bezbednost
    ... sum of the elements of the same column: norm 1 , , 1, ,ij n ij i a A i j n a = = = ∑  (19) Next step is to determinate the criteria weight vector, wi, which is built by averaging the entries on each row of the normalised pairwise comparison matrix, Anorm: 1 , , 1,1 , n i ij j ...
    ... renewables – hydro and biomass. Table 6. Results of individual significance of components Components of availability SOS SS D RES TM Criteria weight, wi 0.0475 0.4552 0.1423 0.2536 0.1195 Individual significance @ 4.7% @ 45% @ 14% @ 25% @ 12% Discussion Based on previously presented results ...
    ... parameters with parameters of economic and social development of a country). Data for 2014 are used in calculation [11]. 2a TPESTM 0.31 toe/1000 US$ Unit of GDP = = (17) Using same methodology for determination of TM2a, it is formed tab. 4 with values of TM2a for some European countries [11-19]. Table ...

  • Geochemical evaluation of dolostone deposits in Montenegro: Implications for potential industrial applications

    Darko Bozovic, Vladimir Simic, Dragan Radulovic, Slobodan Radusinovic, Vesna Matovic, Anja Terzic (2024)
    This study presents a unique model for assessing the dependability of continuous parts of combined systems in open-pit mining through the application of fuzzy logic. Continuous sub-systems as part of the combined system of coal exploitation in surface mines have the basic function of ensuring safe operation, high capacity with high reliability, and low costs. These subsystems are usually part of the thermal power plant’s coal supply system and ensure stable fuel supply. The model integrates various independent partial ...
    примарне сировине, минералогија, физичко-механичка својства, технолошка својства, наука о материјалима

  • Geochemical characterization of sediments from the archaeological site Vinča – Belo Brdo, Serbia

    Gorica Veselinović, Dragana Životić, Kristina Penezić, Milica Kašanin-Grubin, Nevenka Mijatović, Jovana Malbašić, Aleksandra Šajnović (2020)
    Earth-Surface Processes

  • Oдређивање броја камиона за транспорт руде на површинском копу Шупља стијена

    Грујичић Стефан (2024)
    Транспорт на површинским коповима се одвија паралелнпо са осталим процесима екаплоатације. Како не би долазило до непредвиђениих трошкова, потребно је усагласити све системе производње. Димензионисање адекватног транспортног система обезбеђује максималну продуктивност механизације и профитабилну експлоатацију. Чињеница да трошкови транспорта заузимају знатан део укупних трошкова иде у прилог томе да је одређивање потребног броја камиона за превоз откопаног материјала од великог значаја. У овом раду извршен је прорачун броја камиона потребног за транспорт руде од откопних етажа до дробилице на ...
    камионски транспорт, руда, транспортна траса, Талпак
    ... Factor |__1.00 Weight Modification Database Trnuck Payload | 32.05| tonne equiv.to | 11.35|cu.metres Standard Body Capacity of this truck | 24.00| cu metres Empty Trnuck Weight | 27.20|tonne Actual Truck Payload | 32.05| tonne equiv.to | 11.35|cu metres Full Truck Weight | 59.25| tonne |-7]} ...
    ... Actions and Global Options Database Loading Unit . (Std DB) Loader Class: Shovel (hydraulic) loading Unit Operation Database Bucket Capacity 4.50 Available Bucket Capacity |_ eg {Fil Factor Applied) Actual Bucket Capacity | __ 3.60. Edit Loading Unit Template: KOMATSU PC 800-8RN Operational ...
    ... yToBapau). Harnej naHeza 3a. yHOC OBHX TIOJ1aTaKa IIpHKa3aH je Ha cJIHIH 4.2. 43 Material x Name {Rud} Production Measurement : \tonne (e)\Weight · ( Bank Volume ( Loose Volume ·( ProductbyWeight Insitu Bank Density 3553| tonne/bom | _3530| | kg/bcm Swell Factors SwellFactor | Loose Density ...

  • Određivanje broja kamiona za transport jalovine na površinskom kopu „Šuplja Stijena“

    Siniša Bujišić (2024)
    U radu će se govoriti o praktičnoj primeni programskog paketa Talpac za određivanje broja kamiona za transport jalovine na površinskom kopu „Šuplja Stijena“, kao i o ulozi i značaju ovog programa u savremenom rudarstvu. Na osnovu ulaznih podataka i informacija vezanih za Šuplju Stijenu, uz pomoć programskog paketa Talpac izvršeno je projektovanje transportnih trasa. Transportne trase projektovane su tako da obezbede siguran rad ljudstva i opreme, a optimizovane su po pitanju transportnih dužina i organizacije proizvodnje. Kako bi se ...
    alpac, Površinski kop, Transport, Jalovina, Kamion, Šuplja Stijena
    ... Edit Loading Unit Template: KOMATSU PC 800-8RN x Operational Data Costing Data · Distribution Data Actions and Global Options { Change Loader... Project Options... \ , Bucket Selection... 7} Identification Loading Unit Template Name IKOMATSU PC 800 Database Loading Unit _ (Std DB) |KOMATSU ...
    ... Transmission Speed Factor |__1.00 Weight Modfiication 24|Secs 18|Secs Motor Power | 309.0|kW 12|Secs Truck utilisation is product of loader and truck avail. Database Truck Payload | 33.50| tonne equiv.to Standard Body Capacity of this tnuck Empty Truck Weight | 28.10| tonne Actual Truck ...
    ... podataka prikazan je na slici 4.2. 41 Završni rad Siniša Bujišić R44/20 Material x Name [Jalovina Production Measurement : |tonne (e)Weight · „()Bank Volume ()Loose Volume () PProductbyWeight Insitu Bank Density. tornne/bcm 2740 kg/bcm Swell Factors ?Well Factor Loose Density Bank ...

  • Advantages and challenges in presenting mathematical content using EDX platform

    Marija Radojičić, Ivan Obradović, Ranka Stanković, Olivera Kitanović, Roberto Linzalone (2016)
    ... tags which annotate the type of content: a question, a response, a possible response and etc. Also there are possibilities for customizing the weight of each problem, number of attempts, feedbacks, randomization of offered answers and time between attempts. A common situation in creating ...

  • Analysis of a simplified model for determining rock mass oscillation velocity at the Kovilovača open pit

    Suzana Lutovac, Miloš Gligorić, Jelena Majstorović, Luka Crnogorac (2023)
    ... — mechanical characteristics of the working environment are: • angle ofinternal friction o = 31935', • cohesion C = 138.33[kN/m{|, • volume weight y = 26.26[kN/ m{l, • compressive strength O, = 80.808{MPa], • tensile strength O = 7.590[MPa], • velocity of ongitudinal elastic waves C, = ...

  • Multi-word Expressions for Abusive Speech Detection in Serbian

    Ranka Stanković, Jelena Mitrović, Danka Jokić, Cvetana Krstev (2020)
    Ovaj rad predstavlja istraživanja na usavršavanju i unapređenju srpske verzije rečnika Hurtlex, višejezičnog leksikona uvredljivih reči. Posebnu pažnju posvećujemo dodavanju izraza sa više reči (polileksemskih jedinica) koji se mogu smatrati uvredljivim, jer su takvi leksički zapisi veoma važni za postizanje dobrih rezultata u mnoštvu zadataka otkrivanja uvredljivog jezika. Srpski morfološki rečnici se koriste kao osnova za čišćenje podataka i stvaranje rečnika. Istaknuta je veza sa drugim leksičkim i semantičkim resursima na srpskom jeziku i predviđena je izgradnja sistema za ...
    uvredljiv govor, govor mržnje, leksički izvori, višejezični leksikon, izrazi sa više reči
    ... was characterized by extreme subjectivity. Hence, they used a combination of term’s offensiveness and subjectivity impact to calculate and assign a weight from 1 to 5 to each entry of their dictionary. Those weights were later corrected through adaptive learning on the training data set resulting in the ...
    ... ly or together, indicate the required information. The authors conclude that further development of the system could go in the direction of adding weight factors to the components (neutral, less neutral and offensive content and explicit content) which could be used to calculate the overall importance ...

  • Influence of mono- and two-component organic modifiers on determination of lipophilicity of tetradentate Schiff bases

    Nikola Stevanović, Aleksandar Mijatović, Aleksandar Lolić, Mario Zlatović, Rada Baošić (2021)
    Ispitivani su uticaji primene mono- i dvokomponentnih organskih modifikatora na određivanje lipofilnosti 12 tetradentatnih Šifovih baza metodom reverzno-fazne tankoslojne hromatografije. Osnovni cilj je da se proceni tip interakcije između posmatranih jedinjenja i komponenti primenjenih hromatografskih sistema i uspostavi neki obrazac ponašanja kako bi se lakše izabrala kombinacija organskih modifikatora koji će simulirati interakciju u biološkim sistemima na osnovu činjenica da iste osnovne intermolekularne interakcije su odgovorne za ponašanje supstanci i u biološkom i u hromatografskom sistemu. Primenjeni organski modifikator ...
    Šifove baze, Lipofilnost, RP-TLC, Organski modifikatori

  • Microstructural and magnetic properties of electrospun hematite/cuprospinel composites

    Mira Ristić, Aleksandar Kremenović, Michael Reissner, Željka Petrović, Svetozar Musić (2020)
    Phase composition, microstructural and magnetic properties of electrospun hematite/cuprospinel composites were investigated. Samples were synthesized starting with 0 to 10 mol% of copper relative to iron. The round shape of reference electrospun fbres was preserved upon their heating up to 600 °C in air, whereas at 700 °C hollow substructure was additionally formed. In these reference samples the presence of hematite phase was detected by XRPD. A small amount (traces) of Fe3O4 /γ-Fe2O3 was also found, due to the ...
    Electrical and Electronic Engineering, Condensed Matter Physics, Atomic and Molecular Physics and Optics, Electronic, Optical and Magnetic Materials

  • Adsorption and degradation of some psychiatric drugs by sol-gel synthesized titania-based photocatalysts: influence of tungsten and sodium content

    Nina L. Finčur, Maja J. Šćepanović, Mirjana Grujić-Brojčin, Biljana F. Abramović, Jugoslav B. Krstić, Aleksandar Kremenović, Tatjana Srećković, Aleksandar Golubović (2019)
    Mesoporous anatase nanopowders were doped with 0.05−0.5 mol% of W6, in order to obtain more efficient photocatalyst than TiO2 Degussa P25 in the degradation of amitriptyline (AMI) under simulated solar irradiation (SSI). Dominant XRPD peaks were ascribed to anatase phase, with additional peaks which could correspond to brookite, TiO2 bronze and sodium titanate, Na2Ti9O19. The Raman scattering measurements have confirmed anatase as dominant phase, with broad Raman feature at ~270 cm−1 possibly related to Ti–O–Na stretching vibration. All W-doped ...
    Sol-gel synthesis, Doped titania nanopowders, XRPD, Raman spectroscopy, Adsorption and photocatalytic degradation, Psychiatric drugs

  • Development of A Business Intelligence Tool For Accident Analysis in Mines

    Ljiljana Kolonja, Ranka Stanković, Ivan Obradović, Olivera Kitanović, Uroš Pantelić (2015)
    ... that we analyze. Dimensions that are structural attributes of the cube grouping data of similar category are: type 4 of injury, body part, weight of injury, workers age and qualifications, time dimension, organizational structure of mine, shifts and working day in which the violation occurred ...

  • Отварање и припрема лежишта за примену коморно-стубних метода откопавања

    Никола Станишић (2024)
    Циљ мастер рада је да кроз теоријски преглед и практични пример, прикаже процес отварања и припреме лежишта за примену коморно-стубне методе окопавања. Предмет рада је мало лежиште олово-цинкане руде, а од варијација коморно-стубних метода откопавања, изабрана је коморно-стубна метода етажног откопавања са откопавањем одoздо на доле. Рад се бави темама одабира и описа начина отварања и припреме лежишта, методама откопавања, технологијом израде просторија и откопавања лежишта, организацијом рада и проценом трошкова и економичности експлоатације.
    коморно-стубна метода, отварање, припрема, технологија, откопавање
    ... BodyForca Cauka 4.13 – Ipukas uhO0ykogaHux HanoHa 3a npocmopuje npoduna THIT-I (cogpmaep ,, Phase2 “) 26 Strength Factor Initial Element | Unit Weight | _Elastic Loading (MN/m3} Type Material Type Suength | Angle Friction Angle al leg) |[residual) (deg ips ldce) (peak)(dem) (residual) (des) ...
    ... (pakropa craOMJIHOcCTH, KOJH Cy MH3HajL rpaHHIme JIOMa, MO)KE Ce 3aKJbyuuTH a he rpocTopuje ca npobano THII-II oru craOugimHe. Initial Element | Unit Weight Loading (MN/m3) Elastic Type Young's Modulus (MPa} Failure Criterion Material Type Tensile Strength (MPa)} Dilation Angle (deg) ...
    ... THIT-II (codpmaeep „ Phase2 “) 27 Sserength Facscr tension z > s 4 4. š unbounded shear rension Initial Element Loading Unit Weight | Elastic (MN/m3} Type Youngs Modulus (MPa) Type Tensile Strength (MPa} Dilation Angle (deg) de lr deg| es FieldStress and BodyForce ...

  • Agates of the Lece Volcanic Complex (Serbia): Mineralogical and Geochemical Characteristics

    Zoran Miladinović, Vladimir Simić, Nenad Nikolić, Nataša Jović Orsini, Milena Rosić (2024)
    Agate veins and nodules occur in the Lece Volcanic Complex (Oligocene-Miocene) situated in the south of Serbia and occupying an area of 700 km2. This volcanic complex is composed predominantly of andesites, with sporadic occurrences of andesite-basalts, dacites and latites, and features agate formations that have been very little investigated. This study focuses on five selected agate occurrences within the Lece Volcanic Complex, employing optical microscopy, scanning electron microscopy (SEM), X-ray powder diffraction analysis, inductively coupled plasma mass spectrometry ...
    Lecki vulkanski kompleks, andeyit, kalcedon, kvarc, opal-CT, mikrostruktura, organska materija

  • Rock slope stability analysis under Hoek–Brown failure criterion with different flow rules

    Svetlana Melentijević, Zoran Berisavljević, Dušan Berisavljević, Claudio Olalla Marañón (2024)
    The stability analysis of homogeneous rock slope following the Hoek–Brown failure criterion under the hypothesis of different flow rules is performed based on limit equilibrium and finite element methods. The applied failure criterion is the generalized Hoek–Brown that can be introduced as a shear/normal function in analysis applying different flow rules. The results are compared with those obtained by the application of equivalent shear strength parameters of the Mohr–Coulomb criterion, considering that this is still the most widely used ...
    Kružna klizna površ, Huk-Braunov kriterijum loma, Kriterijum popuštanja, Smičuća/normalna funkcija, Nivo napona, Verovatnoća i parametarska analiza

  • Parameter determination of soil oscillation law using quotient of the relative growth increments of oscillation velocity and reduced distances at “Nepričava“ open pit mine

    Suzana Lutovac, Sanja Bajić, Marina Ravilić, Radmila Gaćina (2015)
    ... physical and mechanical properties of the working environment, the following results were obtained: - Compressive strength (21.1 to 93.0) MPa - Volume weight (17.1 to 26.3) kN/m3 - Density (0.97 to 0.99) kN/m3 - Porosity (0.0004 to 0.026) % - Water suction (0.08 to 0.23) % Parameter determination ...

  • Application of Expansive Mortars for the Formation of Artificial Screens During Blasting in Urban Areas

    Milanka Negovanović, Lazar Kričak, Stefan Milanović, Nikola Simić, Jelena Majstorović (2024)
    During construction of buildings in urban areas, sometimes there is a need to blast solid rock mass in the immediate vicinity of the surrounding buildings. In that case, the aim is not only to increase the efficiency of blasting, but also to reduce harmful effects of ground vibration induced by blasting. At the same time, it is very important to protect the buildings located in the safe zone from the blast site as well as remaining rock mass around ...
    expansive mortar, artificial screens, pressure, rock breaking, building foundation