Претрага

Упит dcterms_subject_txt:bucket-wheel excavator

53 items

  • Approach to operational mine planning: Case study Tamnava West

    Dejan Stevanović, Mirjana Banković, Milica Pešić Georgiadis, Ranka Stanković (2014)
    ... tics of bucket wheel excavator (BWE) engaged on that bench (it matches the actual width of the block which is excavated by particular BWE). 2. Also, bench area is divided parallel to the direction of excavation advancing. This division simulates the advancing of each excavator in the mining ...
    ... discretization of model needs to be further conducted, to the level of excavator’s cuts. The reason for this is excavation technology of bucket wheel excavator (BWE) which is based on individually excavation of one cut. In this sense every mining block is divided in several cuts, and BWE excavation ...
    ... stockyards 2. Homogenization of coal in mine site can be achieved at: - mining block (production of one excavator on one bench), - the connecting conveyors (production of all excavator on different benches). For the management of the coal homogenization process at the mining block level ...

  • Development of an integrated model for open-pit-mine discontinuous haulage system optimization

    Miodrag Čelebić, Dragoljub Bajić, Sanja Bajić, Mirjana Banković, Duško Torbica, Aleksej Milošević , Dejan Stevanović (2024)
    equipment selection, mine mechanization, expert judgment, linguistic variables, MCDM, FAHP

  • Determining the Impact of Cutting Elements State on the Bucket–Wheel Excavator Vibration and Energy Consumption

    Filip Miletić, Predrag Jovančić, Miloš Milovančević, Miloš Tanasijević, Stevan Đenadić (2022)
    Background There are two types of specifc sizes’ measurements. The frst is the measurement of energy consumption in a working technological process, and the second is the measurement of vibration, which is displayed over amplitudes of speed. There is an interplay between these two processes. Increasing the power consumption, the value of the vibration speed amplitudes increases. Purpose The process of the determination of machining parameters was based on minimizing the power consumption and vibration of the cutting tool, ...
    merenje, potrošnja energije, vibracije, radni vek reznog elementa

  • Development of the hybrid MCDM model for evaluating and selecting bucket wheel excavators for the modernization process

    Snezana Savkovic, Predrag Jovancic, Stevan Djenadic, Milos Tanasijevic, Filip Miletic (2022)
    This paper presents a methodology for evaluating and ranking different bucket wheel excavators (BWE) for determining which machine should enter in the process of revitalization and modernization. Various multicriteria methods are used. Combining them achieves the best effect when choosing BVE for the modernization process. AHP, TOPSIS, VIKOR, and PROMETHEE methods are used. The hybrid models are developed from the multi-criteria decision making (MCDM) methods and they are used to evaluate the basic indicators that characterize the operation of ...
    višekriterijumsko odlučivanje, rotorni bageri, modernizacija, ekspertska analiza

  • Cutting Resistance Laboratory Testing Methodology for Underwater Coal Mining

    Vladimir Čebašek, Veljko Rupar, Stevan Đenadić, Filip Miletić (2021)
    Geology,Geotechnical Engineering and Engineering Geology
    ... Continuous mining systems, including bucket-wheel excavators (BWE) and bucket- wheel dredges (BWD), have been used in high-volume mining operations for decades. These excavators offer some advantages as compared to the standard mining equipment [1]. The excavator design must reflect specific conditions ...
    ... Continuous mining systems, including bucket-wheel excavators (BWE) and bucket- wheel dredges (BWD), have been used in high-volume mining operations for decades. These excavators offer some advantages as compared to the standard mining equipment [1]. The excavator design must reflect specific conditions ...
    ... type UCW-450 [19]. Bucket-wheel dredge “Kovin I” with bucket wheel type UCW-450 has been used for over 25 years for underwater coal mining [20]. The selection and construction of the excavator parts were performed based on available laboratory data for cutting resistance, which was determined by the standard ...

  • Izbor rotornih bagera za proces revitalizacije: primer rotornih bagera SRs 1200 u rudarskom basenu Kolubara

    Predrag Jovančić, Dragan Ignjatović, Stevan Đenadić, Filip Miletić, Goran Todorović, Dragan Novaković (2020)
    Revitalizacija je proces ili skup tehničkih zahvata na mašini kojim se vrši zamena svih dotrajalih ili oštećenih delova metalne konstrukcije. Sastavni deo procesa revitalizacije je i modernizacija zastarele elektro-mašinske opreme. Principi revitalizacije sasvim sigurno nisu sadržani u okviru redovnog godišnjeg ili dnevnog održavanja. Oni predstavljaju održavanje onih veličina koje su značajne za mašinu kao celinu (u ovom slučaju rotorni bager). U ovom radu su analizirani rotorni bageri oznake SRs 1200. Na površinskim kopovima rudarskog basena Kolubara takvih bagera ima ...
    Rotorni bageri, revitalizacija, SRs1200

  • Towards a Mining Equipment Ontology

    Ranka Stanković, Ivan Obradović, Olivera Kitanović, Ljiljana Kolonja (2012)
    ... of the hierarchical tree, detailed corresponding data on the right hand side are obtained (in this case a bucket wheel excavator). A unique identification number is assigned to each excavator, then one of the existing types of excavators is selected, followed by detailed data such as the label, m ...
    ... first taxonomies in this field was developed at the University of Belgrade Faculty of Mining and Geology (FMG), for bucket wheel excavators, within a project aimed at assessment of excavator condition in the process of revitalization [8]. Taxonomies for other types of equipment were subsequently developed ...
    ... parameter type. Thus the right hand side of the Figure depicts technological parameters for the calculation of technological elements of bucket wheel excavator SchRs 630 25/6, which has been selected in the tree on the left hand side. Namely, the data type, the measurement unit, the way in which data ...

  • Improving efficiency of thermal power plants through mine coal quality planning and control

    Mirjana Banković, Dejan Stevanović, Milica Pešić, Aleksandra Tomašević, Ljiljana Kolonja (2018)
    Главни циљ контроле квалитета угља у рудницима лигнита је снабдевање термоелектрана угљем чији квалитет мора да се креће унутар одређених квалитативних ограничења. Карактеристике угља могу да утичу на ефикасност, поузданост и расположивост како котла тако и јединица за контролу емисије. У овом раду аутори су презентовали интегрисану симулацију рударског процеса као нови приступ у истраживању променљивости калоричне вредности угља приликом експлоатације комплексног лежишта лигнита. Резултати таквог приступа омогућавају драгоцен увид у перформансе континуалног рударског система у смислу контроле променљивости ...
    mine planning, variability of coal quality, simulation, coal blending

  • Application of the Fuzzy Model in the Evaluation and Selection of Hydraulic Excavators on Open-Pit Lignite Mine

    Stevan Đenadić, Miloš Tanasijević, Vladimir Milisavljević, Dragan Ignjatović, Predrag Jovančić (2021)
    The production of lignite in large open-pit mines is mainly performed with continuously operating equipment, where bucket-wheel excavators, bucket-chain excavators, belt conveyors, and spreaders are the basic machines. Smaller machines, usually of discontinuous operating nature, are commonly categorized as auxiliary machines. This paper presents the research related to the analysis of auxiliary machine parameters with the case study for a hydraulic excavator. The purpose of the analysis was to develop a model of rating quality of service of the ...
    Fuzzy theory, hydraulic excavator, selection, quality of service, asset management

  • Managing mining project documentation using human language technology

    Aleksandra Tomašević, Ranka Stanković, Miloš Utvić, Ivan Obradović, Božo Kolonja (2018)
    Purpose: This paper aims to develop a system, which would enable efficient management and exploitation of documentation in electronic form, related to mining projects, with information retrieval and information extraction (IE) features, using various language resources and natural language processing. Design/methodology/approach: The system is designed to integrate textual, lexical, semantic and terminological resources, enabling advanced document search and extraction of information. These resources are integrated with a set of Web services and applications, for different user profiles and use-cases. Findings: The ...
    Digital libraries, Information retrieval, Data mining, Human language technologies, Project documentation

  • Optimizacija parametara reza rotornog bagera pri otkopavanju materijala sa povećanom čvrstoćom

    Saša D. Bošković (2016-09-09)
    Otkopavanje materijala rotornim bagerom je veoma sloţen fiziĉko-mehaniĉki proces. Pokazatelji efektivnosti tog procesa zavise od velikog broja raznovrsnih ĉinilaca od kojih se posebno mogu istaći: fiziĉko-mehaniĉke karakteristike materijala koji se otkopava, reţim rada bagera i izbor tehnoloških parametara bloka, odreska i reza, geometrije vedrica i zuba itd. Poseban problem se javlja kod otkopavanja materijala povećane ĉvrstoće, što je ĉest sluĉaj na našim površinskim kopovima. Dimenzionisanje specifiĉne sile kopanja bagera prema manjim masama izuzetno ĉvrstog materijala je neracionalno i rešenje ...
    rotorni bager, parametri reza, otpor na kopanje, dinamika bagera, kapacitet, optimizacija, specifična potrošnja energije
    ... 622.232:624.042:624.13(043.3) OPTIMIZATION OF BUCKET WHEEL EXCAVATOR CUTTING PARAMETERS AT MINING OF MATERIALS WITH INCREASED STRENGTH Summary Mining of material by a bucket wheel excavator is a very complex physical physical-mechanical process. Indicators of the ...
    ... by optimization of bucket wheel excavator operation i.e. in the selection of the optimal type of cut and parameters of slices in order to reduce resistance to digging, reducing energy consumption and reducing the dynamic effects on the structure of the bucket wheel excavator. Current research ...
    ... best effects of excavator operation are achieved with vertical cut and thickness of 0.20 m, width 0.30 m, i.e. with the slewing speed of bucket wheel boom of 24 m/min. It has been demonstrated that it is necessary to change the existing mining technology by the bucket wheel excavator, but also with ...

  • The optimization of auxiliary machinery in open-cast lignite mines: a case study of bulldozers

    Dragan Ignjatović, Predrag Jovančić, Stevan Đenadić, Ivan Janković, Ivica Ristović (2019)
    One of the most important prerequisites for the successful operation of the open-cast lignite mine is to carry out all the auxiliary works timely with the necessary quality. The most important and most commonly used auxiliary machines are bulldozers. Engaging time of bulldozers use is in direct relation with the coefficients of the time and capacity utilization of the continuous system for the excavation of coal and tailings, which indicates their importance. More than 100 bulldozers have been hired ...
    open-cast coal mine, auxiliary works, bulldozers, optimization, availability
    ... complete all planned tasks and create optimal conditions for operation of main mining machines (bucket wheel excavators, belt conveyors and stackers). It also should be noted that one hour of bucket wheel excavator — belt conveyor — stacker system operation is valued at several thousands of euros, and that ...
    ... reduce the operational and maintenance costs, increase the volume of auxiliary works and create conditions for maximal utilization of Excavator — Conveyor — Stacker and Excavator — Conveyor — Crusher systems. In another word, these activities will increase time utilization and production rate utilization ...

  • Development of terminological resources for expert knowledge: a case study in mining

    Ljiljana Kolonja, Ranka Stanković, Ivan Obradović, Olivera Kitanović, Aleksandar Cvjetić (2015)

  • Terminology Acquisition and Description Using Lexical Resources and Local Grammars

    Cvetana Krstev, Ranka Stanković, Ivan Obradović, Biljana Lazić (2015)
    Acquisition of new terminology from specific domains and its adequate description within terminological dictionaries is a complex task, especially for languages that are morphologically complex such as Serbian. In this paper we present an approach to solving this task semi-automatically on basis of lexical resources and local grammars developed for Serbian. Special attention is given to automatic inflectional class prediction for simple adjectives and nouns and the use of syntactic graphs for extraction of Multi-Word Unit (MWU) candidates for ...
    ... geochemical research” and a term for technical characteristics of machines “Length of the caterpillar transporting device measured from the vertical excavator rotation axis to the front edge of the caterpillar”. 4.2 Extraction of MWUs from domain texts The extraction of MWUs from a text is preceded ...
    ... eksploatacija mineralnih sirovina ‘exploitation of mineral resources’) but also a noun followed by a prepositional phrase (e.g. bager na šinama ‘excavator on rails’). There are 29 such classes for Serbian nominal MWUs.5 However, 10 of them are used for the inflection of more than 98% of all nominal ...
    ... 6. NXN – a noun followed by a noun that agrees with it in number and case, where the separa- tor can be a hyphen; e.g. bager kašikar ‘shov- el excavator’. 7. AXAXN – a noun preceded by two adjectives that agree with it in gender, number, case and animateness; e.g. površinski istražni radovi ‘surface ...

  • Optimizacija dužine strele rotornih bagera u funkciji stabilnosti kosina i efektivnosti rada na površinskim kopovima lignita Srbije

    Branko M. Petrović (2016-07-12)
    Rotorni bageri su mašine koje se u današnje vreme najviše primenjuju uprocesu masovne eksploatacije uglja zahvaljujući, pre svega, nizu tehničkoeksploatacionihprednosti u odnosu na druge vrste bagera. Raznovrsnirudarsko-tehnički zahtevi otkopavanja doprineli su razvoju nekoliko tipova ovihmašina, tako da svaki od njih ima svoje prednosti i nedostatke u odnosu nadrugi tip.Predmet istraživanja u disertaciji odnosi se na izbor optimalnekonstrukcije strele bagera i njene usaglašenosti sa uslovima radne sredine kojiće vladati na površinskim kopovima lignita Srbije, imajući u vidu složene usloveeksploatacije (velika ...
    površinski kop, parametri bloka, kapacitet, rotorni bager, strelabagera, geomehanika, stabilnost kosina, ekonomija
    ... Springer, London, 2015. [19.] Ignjatović D., Petrović B., Jovančić P., Bošković S.; IMPACT OF THE BUCKET WHEEL SUPPORT AT TECHNICAL PARAMETERS OF THE BLOCK AND BUCKET WHEEL EXCAVATOR CAPACITY, Proceedings of the 12th international symposium continuous surface mining-Aachen 2014., 73-81, Aachen ...
    ... heights and angle of inclination, with better economic and environmental effects. Keywords: open pit, block parameters, capacity, bucket wheel excavator, excavators boom length, geomechanics, slope stability, economy, Scientific field: Mining Engineering Special scientific field: ...
    ... uslovima otkopavanja. Grupa autora A. Brkić, T. Manevski, D. Ignjatović, P. Jovančić i V. Spasojević-Brkić, je u svom radu Diagnostics of bucket wheel excavator discharge boom dynamic perfomance and its reconstruction [8], istražila uzroke loših dinamičkih perfomansi rotornog bagera C-700 S koji ...

  • Analiza primene višekriterijumskih metoda u optimizaciji izbora hidruličnih bagera na površinskim kopovima uglja

    Stevan Đenadić, Predrag Jovančić, Dragan Ignjatović, Filip Miletić, Ivan Janković (2019)
    Hidraulični bageri primenjuju se u različitim oblastima privrede a najzastupljeniji su u građevinarstvu i rudarstvu. Na površinskim kopovima sa kontinualnim sistemima, klasifikuju kao pomoćna mehanizacija a na površinskim kopovima sa diskontinualnim sistemima, kao osnovna mehanizacija. Kako je u oba slučaja njihova primena neizostavna, važno je izvršiti adekvatnu analizu postojećih podataka, u cilju optimizacije izbora tipa hidrauličnog bagera u odnosu na uslove rada datog površinskog kopa. U radu su opisane različite višekriterijumske metode koje su korišćene za analizu hidrauličnih bagera. ...
    višekriterijumske metode, površinski kop uglja, pomoćna mehanizacija, hidraulični bager
    ... in both cases, it is important to carry out an adequate analysis of the existing data in order to optimize the choice of the type of hydraulic excavator in relation to the working conditions of a particular open- cast mine. This paper aims to demonstrate the potential of multi-criteria optimization ...

  • Non-Detonating Chemical Mixture for Non-Invasive Methods of Rock Breaking

    Lazar Kričak, Milanka Negovanović, Nikola Simić, Stefan Milanović (2024)
    Within the Innovation developed several different non-detonating chemical mixtures for non-invasive methods of rock breaking. Laboratory and polygon tests gave the satisfactory results and knowledge enough to start the practical experiments in the field. The basis of this innovation is a theoretical assumption that certain chemical mixtures release a large quantity of gases during combustion. If these gases are found in the enclosed space a growing pressure on the walls of the chamber in which combustion takes place will ...
    non-detonating, chemical mixture, rock breaking, borehole pressure

  • Multi-Criteria Approach for Selecting Optimal Dozer Type in Open-Cast Coal Mining

    Ivan Janković, Stevan Đenadić , Dragan Ignjatović , Predrag Jovančić , Tomislav Šubaranović, Ivica Ristović (2019)
    Analitički hijererhijski proces (AHP), dozeri, eksploatacija uglja, površinski kopovi
    ... levelling ground on the terrain, the movement of the transporters, breaking piles, pushing scattered masses into the zone of effect of the bucket-wheel excavator, shaping slopes, cleaning the benches, pulling operating stations or other machines, checking the ground stability, etc. The classification ...
    ... levelling ground on the terrain, the movement of the transporters, breaking piles, pushing scattered masses into the zone of effect of the bucket-wheel excavator, shaping slopes, cleaning the benches, pulling operating stations or other machines, checking the ground stability, etc. The classification ...
    ... continuous system of production in open-cast coal mining, in addition to the basic machinery which consists of highly productive machines (bucket-wheel excavators, bucket-chain excavators, spreaders, conveyor-belt transporters, etc.) that provide an uninterrupted exploitation of mineral ores, the usage of ...

  • A Model for Determining the Dependability of Continuous Subsystems in Coal Mines Using the Fuzzy Logic Approach

    Nikola Stanić, Miljan Gomilanović, Petar Marković, Daniel Krzanović, Aleksandar Doderović, Saša Stepanović (2024)
    This study presents a unique model for assessing the dependability of continuous parts of combined systems in open-pit mining through the application of fuzzy logic. Continuous sub-systems as part of the combined system of coal exploitation in surface mines have the basic function of ensuring safe operation, high capacity with high reliability, and low costs. These subsystems are usually part of the thermal power plant’s coal supply system and ensure stable fuel supply. The model integrates various independent partial ...
    fuzzy logic, max-min composition, continuous part of combined system (CCS), open pit, mining, dependability

  • An intelligent hybrid system for surface coal mine safety analysis

    Nikola Lilić, Ivan Obradović, Aleksandar Cvjetić (2010)