Претрага

Упит dcterms_subject_txt:Control and Optimization

2347 items

  • Estimating hydraulic parameters for the complex hydrodynamic models

    Dušan Polomčić, Dragoljub Bajić, Jelena Ratković, Bojan Hajdin (2018)
    Hydrodynamic models have usually been calibrated manually, by trial-and-error, with different values of hydraulic parameters and hydraulic characteristics of boundary conditions. This method of calibration and estimation of hydraulic parameters requires an extensive knowledge and experience of experts, but whether the resulting solution includes an optimal set of parameters still remains an open question. An optimization method founded upon the Gauss-Marquardt-Levenberg algorithm, along with PEST software based on that algorithm, introduces automation of model calibration with regularization, which substantially ...
    kalibracija, optimizacija, PEST, koeficijent filtracije

  • Multicriteria Analysis and Optimization of Groundwater Control Systems with Variable Values of Criterion over Predefined Time Points

    Milica Stepanović, Dragoljub Bajić, Dušan Polomčić (2021)
    VIKOR метода, алтернативе, компромисно решење, подземне воде, одводњавање рудника

  • Soft computing optimization in the coal industry

    Benović Tomo, Miljanović Igor, Gajić Grozdana, Maksimović Svetomir, Milutinović Aleksandar (2011)

  • The optimization of auxiliary machinery in open-cast lignite mines: a case study of bulldozers

    Dragan Ignjatović, Predrag Jovančić, Stevan Đenadić, Ivan Janković, Ivica Ristović (2019)
    One of the most important prerequisites for the successful operation of the open-cast lignite mine is to carry out all the auxiliary works timely with the necessary quality. The most important and most commonly used auxiliary machines are bulldozers. Engaging time of bulldozers use is in direct relation with the coefficients of the time and capacity utilization of the continuous system for the excavation of coal and tailings, which indicates their importance. More than 100 bulldozers have been hired ...
    open-cast coal mine, auxiliary works, bulldozers, optimization, availability
    ... Mining and Geology archives faculty publications available in open access, as well as the employees' publications. - The Repository is available at: www.dr.rgf.bg.ac.rs 7% International Symposium MINING AND ENVIRONMENTAL PROTECTION 25 - 28 September 2019, Vrdnik, Serbia THE OPTIMIZATION OF AUXILIARY ...
    ... cycle of that machihe. Keywords: Open-cast coal mine, auxiliary works, bulldozers, optimization, availabilifty. 1. INTRODUCTION Dozers are most common auxiliary machines at open-cast coal mines, both by type and the scope of tasks these machines can be used for. In the open-cast lignite mines of ...
    ... 04:30:52 The optimization of auxiliary machinery in open-cast lignite mines: a case study of bulldozers Dragan Ignjatović, Predrag Jovančić, Stevan Đenadić, Ivan Janković, Ivica Ristović Дигитални репозиторијум Рударско-геолошког факултета Универзитета у Београду [ДР РГФ] The optimization of auxiliary ...

  • Ograničenja primene optimizacionih algoritama u slučaju kopova

    Dejan Stevanović, Mirjana Banković, Milica Pešić Georgiadis, Petar Marković, Dejan Ranković (2020)
    Proces optimizacije površinskih kopova, kao sastavni deo strateškog planiranja, veoma je važan sa stanovišta ostvarivanja maksimalnih efekata proizvodnje. To je složen zadatak koji vrlo često podleže vrlo strogim geometrijskim i drugim praktičnim rudarskim ograničenjima. Ova ograničenja u posebno su izražena na površinskim kopovima uglja, te u značajnoj meri mogu povećati stepen neizvesnosti rudarskog projekta, odnosno izazvati neželjena dejstva u pogledu profitabilnosti poslovanja. Iz tog razloga, veoma je važna primena savremenih optimizacionih alata, koji u značajnoj meri mogu olakšati celokupan ...
    ... mines, and can significantly increase the degree of uncertainty of the mining project, or cause side effects in terms of business profitability. For this reason, it is very important to apply modern optimization tools, which can significantly facilitate the entire optimization process, and also reduce ...
    ... Plants Through Mine Coal Quality Planning and Control. Thermal Science, 22(1B), pp.721-733, 2017 Benndorf J.: Investigating the variability of key coal quality parameters in continuous mining operations when using stockpiles. Advances in Orebody Modelling and Strategic Mine Planning I. AusiMM, 2011 ...
    ... Abstract The process of open pit mine optimization, as an integral part of strategic planning, is very important from the point of view of achieving maximum economic efficiency of production. It is a complex task that is very often subject to very strict geometric and other practical mining restrictions ...

  • Cutting Parameters Optimization for Difficult Excavating Conditions with Bucket Wheel Excavators on Gracanica Opencast Mine in Gacko

    Ignjatović Dragan, Pavlović Vladimir, Jovančić Predrag, Bošković Saša (2013)

  • Behaviour Diagnostics Of Bucket Wheel Support Structure Using Finite Elements Method: Optimization Of Structures

    Predrag Jovančić, Dragan Medenica, Vladimir Milisavljević, Ivica Ristović (2015)

  • Improving efficiency of thermal power plants through mine coal quality planning and control

    Mirjana Banković, Dejan Stevanović, Milica Pešić, Aleksandra Tomašević, Ljiljana Kolonja (2018)
    Главни циљ контроле квалитета угља у рудницима лигнита је снабдевање термоелектрана угљем чији квалитет мора да се креће унутар одређених квалитативних ограничења. Карактеристике угља могу да утичу на ефикасност, поузданост и расположивост како котла тако и јединица за контролу емисије. У овом раду аутори су презентовали интегрисану симулацију рударског процеса као нови приступ у истраживању променљивости калоричне вредности угља приликом експлоатације комплексног лежишта лигнита. Резултати таквог приступа омогућавају драгоцен увид у перформансе континуалног рударског система у смислу контроле променљивости ...
    mine planning, variability of coal quality, simulation, coal blending

  • Optimizacija faznog razvoja Površinskog kopa Ciganuša – Škorac u cilju definisanja dugoročne dinamike eksploatcije

    Dejan Stevanović, Petar Marković, Mirjana Banković, Milan Živković (2022)
    Definisanje dugoročne dinamike razvoja rudarskih radova koja je u potpunosti usaglašena sa strateškim ciljevima Investitora, veoma je zahtevan zadatak, koji vrlo često podrazumeva veliki broj ograničenja. Adekvatno definisana dinamika razvoja rudarskih radova treba da obezbedi dugoročne zahteve u pogledu kapaciteta, kvaliteta i raspodele resursa neophodnih za ispunjavanje strateških ciljeva, koji se po pravilu svode na ostvarenje maksimalnog profita. Uspešno definisanje dinamike eksploatacije (posebno kod metaličnih ležišta) u najvećoj meri zavisi od optimizacije faznog razvoja površinskog kopa, odnosno od pravilnog ...
    dinamika razvoja, faze razvoja, optimizacija kopa, strateški ciljevi, Whittle

  • Overwiew of In-Pit Crushing & Conveying Technology in Open Pit Mines

    Ali Nasirinezhad, Dejan Stevanović, Dragan Ignjatović, Petar Marković (2021)
    The conditions under which contemporary surface mining operations is carried out obviously becoming increasingly complex. In such complex conditions, the optimization of haulage systems as the technological phase with the largest share in the total operating costs, is very important from the aspect of achieving profitability of the mining project. In a large number of cases, the application of traditional haulage systems with trucks (as the most dominant type of haulage in open pit mines) does not lead to ...
    In Pit Crushing and Conveying, IPCC, open pit mining, haulage, optimization, costs saving

  • Mitigating hydrate formation in onshore gas wells: A case study on optimization techniques and prevention

    Milica Ješić, Bojan Martinović, Stefan Stančić, Miroslav Crnogorac, Dušan Danilović (2023)
    Gas wells, particularly those situated onshore, play a vital role in the global energy sector by supplying a significant portion of natural gas. However, operational challenges, notably gas hydrate formation, pose substantial issues, leading to complications such as flowline blockages and unexpected well shutdowns. Gas hydrates, crystalline structures resembling ice, ...
    Gas Well, Gas Hydrate Formation, Well Modeling, Well Performance Optimization, Choke Position Adjustments, Methanol Injection

  • Komparativna analiza završnih kontura površinskog kopa Drmno

    Dejan Stevanović, Dragan Ignjatović, Tomislav Šubaranović, Mirjana Banković, Petar Marković (2022)
    Definisanje optimalne završne konture površinskog kopa od suštinskog je značaja za ostvarivanje strateških ciljeva u razvoju rudarskih projekata. Savremeni programski paketi i metode za optimizaciju granica kopa, zasnivaju se na pronalasku završne konture koja obezbeđuje maksimalan profit. U slučaju površinskih kopova uglja, kod kojih osim profita postoji i čitav niz dodatnih kriterijuma i strateških ciljeva, princip optimizacije granica prema profitu, najčešće nije u potpunosti primenjiv. Iz rog razloga za uspešno definisanje granica površinskih kopova, neophodno je sagledati čitavu lepezu ...
    završna kontura, ugalj, komparativna analiza, optimizacija, strateški ciljevi

  • Application of the VIKOR Method for Selecting the Purpose of Recultivated Terrain after the End of Coal Mining

    Radmila Gaćina, Sanja Bajić, Bojan Dimitrijević, Tomislav Šubaranović, Čedomir Beljić, Dragoljub Bajić (2024)
    reclamation, coal, sustainable development, multi-criteria decision making, VIKOR method

  • Optimisation of underground mine decline development system using genetic algorithm

    Zoran Gligorić, Aleksandar Ganić, Rade Tokalić, Aleksandar Milutinović (2014)
    ... J.A. and HOUCK, C.R. (1994) On the use of non-stationary penalty functions to solve non-linear constrained optimization problems with GA's. In: Proceedings of the First IEEE Conference on Evolutionary Computation, Orlando, June 1994. New York: IEEE Press, pp.579-584. 5 SHOPOVA, G.E. and VAK ...
    ... all main terminals (points). Main terminals are: mineral processing facility, surface breakout point and ore body access points. Brazil et al. created a software tool called Decline Optimization Toll (DOT). The heuristic methods used in DOT1 are replaced in the new version of the software tool ...
    ... from one and only one individual with predefined probability. After three operators are carried the offspring is inserted into the population, replacing the parent chromosomes in which they were derived from, producing a new generation. This cycle is performed until the optimization criterion ...

  • Novi model za postizanje optimalne proizvodnje na naftnom polju Amal

    Elnori Elmabrouk Ali Elhaddad (2015-04-16)
    Doktorskom disertacijom analizirani su i proučavani problemi proizvodnje nafte iprimenjene metode za njihovo rešavanje na naftnom polju Amal. Ukratko jeprikazana proizvodnje nafte u Libiji, njene karakteristike i rezerve, da bi se videoznačaj ovog naftnog polja.Utvrđeno je da su na naftnom polju Amal ključni problemi koji prate procesproizvodnje taloženje parafina, pojava slojnog peska, neefikasan rad gasliftsistema, neefikasna desalinizacija nafte i ekološki problemi. Proizvodniproblemi, pojedinačno i više njih zajedno, na nekim bušotinama uzrokovali susmanjenje proizvodnje nafte od 40 do 75%. Zbog ...
    nafta, proizvodnja, optimizacija, Amal, Libija
    ... optimal design of sand control in offshore oilfield, J Petrol Explor Prod Technol, DOI 10.1007/s13202-012-0045-7. Denney D., (2002). “Simulation and optimization of continuous gas lift,” Journal of Petroleum Technology, vol. 54, no. 5, p. 60. Diallo M.S., Cagin T., Faulon J.L., and Goddard W.A., (2000) ...
    ... production optimization process and the modeling of a new and more efficient oil exploitation technology. Key words: oil, production, optimization, Amal, Libya. Scientific field: Mining engineering Scientific Area: Petroleum engineering, mechanization and automation ...
    ... Intermittent Gas Lift, Conference – Improvement and Optimization of Technological Methods in 95 Mining, Geology and Metalurgy, Belgrade, November, 1990, Conference Proceedings, pp. 302-308. Solesa M. (1997)a model for diagnosis and optimization of wells in intermittent gas lift at oilfield ...

  • Novi model za postizanje optimalne proizvodnje na naftnom polju Amal

    Elnori Elmabrouk Ali Elhaddad (2015-04-16)
    Doktorskom disertacijom analizirani su i proučavani problemi proizvodnje nafte iprimenjene metode za njihovo rešavanje na naftnom polju Amal. Ukratko jeprikazana proizvodnje nafte u Libiji, njene karakteristike i rezerve, da bi se videoznačaj ovog naftnog polja.Utvrđeno je da su na naftnom polju Amal ključni problemi koji prate procesproizvodnje taloženje parafina, pojava slojnog peska, neefikasan rad gasliftsistema, neefikasna desalinizacija nafte i ekološki problemi. Proizvodniproblemi, pojedinačno i više njih zajedno, na nekim bušotinama uzrokovali susmanjenje proizvodnje nafte od 40 do 75%. Zbog ...
    nafta, proizvodnja, optimizacija, Amal, Libija
    ... optimal design of sand control in offshore oilfield, J Petrol Explor Prod Technol, DOI 10.1007/s13202-012-0045-7. Denney D., (2002). “Simulation and optimization of continuous gas lift,” Journal of Petroleum Technology, vol. 54, no. 5, p. 60. Diallo M.S., Cagin T., Faulon J.L., and Goddard W.A., (2000) ...
    ... production optimization process and the modeling of a new and more efficient oil exploitation technology. Key words: oil, production, optimization, Amal, Libya. Scientific field: Mining engineering Scientific Area: Petroleum engineering, mechanization and automation ...
    ... Intermittent Gas Lift, Conference – Improvement and Optimization of Technological Methods in 95 Mining, Geology and Metalurgy, Belgrade, November, 1990, Conference Proceedings, pp. 302-308. Solesa M. (1997)a model for diagnosis and optimization of wells in intermittent gas lift at oilfield ...

  • Selection of Artificial Lift Methods: A Brief Review and New Model Based on Fuzzy Logic

    Miroslav Crnogorac, Miloš Tanasijević, Dušan Danilović, Vesna Karović Maričić, Branko Leković (2020)
    Artificial lift methods have applications in oil wells where oil production is no longer possible due to natural reservoir energy, so this necessary energy is added by introducing lift methods. In order to achieve optimum production, the selection of an artificial lift method is very important. This paper uses fuzzy logic as a mathematical and conceptual model for selection of the optimal artificial lift method. The outcome or IF-THEN rules, as the central part of the model, is based ...
    mehaničke metode, proizvodnja nafte, fazi logika, donošenje odluka, optimizacija
    ... data for the optimization model, and the output is the most suitable artificial lift method [11–14]. The analysis of the mathematical and conceptual models indicates that: • there are several input parameters (I, II, III); • for the first and third groups, parameters are measurable and can be displayed ...
    ... Parameter A2 represents the level of automatic regulation and automatic control. Grades are given depending on the existence of automatic regulation and management and the possibility of applying them. A2 = {complete manual control; dominantly manual with automated individual operations; sem ...
    ... }. Parameter A2 represents the level of automatic regulation and automatic control. Grades are given depending on the existence of automatic regulation and management and the possibility of applying them. A2 = {complete manual control; dominantly manual with automated individual operations; sem ...

  • Uticaj geološke neizvesnosti u razvoju rudarskih projekata

    Petar Marković, Dejan Stevanović, Mirjana Banković (2023)
    Rudarstvo je industrija koja se nosi sa različitim vrstama neizvesnosti i rizika zbog svoje prirode i specifičnosti. Neizvesnost u rudarstvu može poticati iz različitih izvora i uticati na različite aspekte rudarskih projekata. Kao jedan od dominantnih faktora, ističe se geološka neizvesnost. Geološka neizvesnost igra ključnu ulogu u rudarstvu i može značajno uticati na procenu resursa i rezervi, planiranje eksploatacije, ekonomsku isplativost i upravljanje rizicima. Ova neizvesnost se ne može eliminisati, ali se uz primenu adekvatnih standarda i zakona može ...
    ... traditional optimization: Grade uncertainty and risk effects in open-pit design. Transactions of the Institution of Mining and Metallurgy , 3, 82-88. [7] Edwards A.C. (2001). Mineral resource and ore reserve estimation : the AusiIMM guide to good practice. Australasian Institute of Mining and Metallurgy ...
    ... Dimitrakopoulos R. (2016). Global optimization of open pit mining complexes with uncertainty. Applied Soft Computing , 40, 292-304. [11] Kolonja B., Stevanović D., Pešić-Georgiadis M., Banković M., Kolonja Lj. (2015). Uncertainty in pit optimization. Mining and Enviromental protection. Vrdnik, Serbia ...
    ... influence of the degree of reliability of the geological characteristics of the deposit on the results of the pit optimization, are shown. The analysis was carried out on an iron ore deposit and is based on the assumed uncertainty that may occur in the assessment of the content of the useful component ...

  • Split-Desktop software for the analysis of fragment size distribution of blasted rock mass

    Milanka Negovanović, Lazar Kričak, Stefan Milanović, Jovan Marković, Nikola Simić, Snežana Ignjatović (2023)
    Drobljenje stena je najvažniji pokazatelj u proceni efekata miniranja pri proizvodnom miniranju u površinskoj eksploataciji. Stepen drobljenja stena ima veliki uticaj na efikasnost daljih operacija utovara, transporta, drobljenja i mlevenja. Optimalno drobljenje stena pri proizvodnom miniranju utiče na smanjenje ukupnih troškova proizvodnje. Stoga je pouzdana procena veličine drobljenja odminirane stenske mase veoma važno pitanje, ne samo u operacijama miniranja, već i u rudarskoj proizvodnji. Za predviđanje distribucije veličine komada odminirane stenske mase postoje različiti empirijski modeli. KUZ-RAM model omogućava ...
    Split-Desktop softver, drobljenje stena, miniranje, analiza, digitalna obrada fotografija

  • Using Query Expansion for Cross-Lingual Mathematical Terminology Extraction

    Velislava Stoykova, Ranka Stanković (2018)