Collected Item: “Understanding the effect of synthesis and sintering temperature on the functional properties of barium titanate/cobalt ferrite composites”
Врста публикације
Рад у часопису
Верзија рада
објављена верзија
Језик рада
енглески
Аутор/и (Милан Марковић, Никола Николић)
Marija Suljagic, Aleksandar Kremenovic, Ivan Petronijevic, Adis Dzunuzovic, Miljana Mirkovic, Vladimir Pavlovic, Ljubica Andjelkovic
Наслов рада (Наслов - поднаслов)
Understanding the effect of synthesis and sintering temperature on the functional properties of barium titanate/cobalt ferrite composites
Наслов часописа
Science of Sintering
Издавач (Београд : Просвета)
National Library of Serbia
Година издавања
2023
Сажетак на енглеском језику
To investigate the effect of synthesis procedure and sintering temperature on the
functional properties of perovskite/spinel ceramics, BaTiO3/CoFe2O4 composites were
prepared by thermal decomposition, coprecipitation, and microemulsion method, and sintered
at 1150°C and 1300°C. The phase composition and morphology of as-prepared powders as
well as sintered ceramics were thoroughly examined by X-ray powder diffraction (XRPD) and
scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS).
The dielectric and ferroelectric measurements were performed in detail. Generally, the
samples sintered at 1300°C had better performances than those sintered at 1150°C. The
composite synthesized by thermal decomposition and sintered at 1300 °C stands out among
other prepared BaTiO3/CoFe2O4 ceramics, owing to high stability in the wide frequency
range and low leakage currents. The obtained results indicate that such composite might be
successfully applied as a functional multiferroic.
functional properties of perovskite/spinel ceramics, BaTiO3/CoFe2O4 composites were
prepared by thermal decomposition, coprecipitation, and microemulsion method, and sintered
at 1150°C and 1300°C. The phase composition and morphology of as-prepared powders as
well as sintered ceramics were thoroughly examined by X-ray powder diffraction (XRPD) and
scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS).
The dielectric and ferroelectric measurements were performed in detail. Generally, the
samples sintered at 1300°C had better performances than those sintered at 1150°C. The
composite synthesized by thermal decomposition and sintered at 1300 °C stands out among
other prepared BaTiO3/CoFe2O4 ceramics, owing to high stability in the wide frequency
range and low leakage currents. The obtained results indicate that such composite might be
successfully applied as a functional multiferroic.
Волумен/том или годиште часописа
55
Број часописа
3
Почетна страна
367
Завршна страна
381
Укупан број страна рада (уколико не постоји пагинација)
15
DOI број
10.2298/SOS220512013S
ISSN број часописа
0350-820X
Кључне речи на српском (одвојене знаком ", ")
Perovskite/spinel ceramics; Multiferroic; Sintering; Influence of synthesis method.
Кључне речи на енглеском (одвојене знаком ", ")
Perovskite/spinel ceramics; Multiferroic; Sintering; Influence of synthesis method.
Линк
http://dx.doi.org/10.2298/SOS220512013S
Шира категорија рада према правилнику МПНТ
M20
Ужа категорија рада према правилнику МПНТ
М22
Степен доступности
Затворени приступ
Лиценца
All rights reserved
Формат дигиталног објекта
.pdf